Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Oh no, now I've done it !
Name: Eric S Date: January 28, 2003 at 19:05:46 Pacific OS: Win 98 CPU/Ram: 200mhz/64mb
Comment:
Installed 3com Etherlink III ISA Network card, downloaded and installed software. After reboot video output is gone. Tried different monitor and different videocard but still black.She will not be pleased. Any suggestions would be humbly appreciated.
Name: 666 Date: January 28, 2003 at 20:09:44 Pacific
Reply:
remove the ethernet card you just installed
0
Response Number 2
Name: ryan Date: January 28, 2003 at 20:38:25 Pacific
Reply:
yes, your ethernet card you just installed might be sharing irq with your video card and cause your video card tv-out no longer function correctly. you can try to remove the card and put it in another isa slot. good luck.
0
Response Number 3
Name: Evan Date: February 9, 2003 at 12:40:13 Pacific
Reply:
Ryan is correct, your ethernet card you just might be sharing irq with your video card and cause your video card tv-out no longer function correctly.
Remove ASAP, Evan
0
Response Number 4
Name: Evan Date: February 9, 2003 at 12:41:12 Pacific
Reply:
Ryan is correct, your ethernet card you just might be sharing irq with your video card and cause your video card tv-out no longer function correctly.
Summary: Why would I get no video output on a board with integrated graphics? ... Hello -- A friend asked me to investigate her Dimension 2400 after a known piece of malware infected it. ...////... I did the f...
Summary: Where do I start? I was running winxppro sp2 on a 30gb partition (c:)on a 250gb HD. The other 220gb partition was used for storage (d:). I also had another 250gb HD that i used for storage (e:). I was...
Summary: Hopefully this should be easy to answer but I'm just not 100% sure. I'm trying to get the new system to post but it just will not do so. I've followed many Forums searching for my exact problem but ...
0 
