Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
No signal on xp boot up on the LCD Screen
Name: dnxdanny Date: July 3, 2009 at 12:57:52 Pacific OS: Windows XP Subcategory: General
Comment:
On booting my emachines 620 the monitor shows no signal. I have tried two different monitors the message is the same. The fans are all running and the flash light is on and steady no flashing. I have tred to turn the computer on and use F8 to start it on safe mode without any success. I have used the monitor with my laptop and it works perfectly well. So the problem should be with my monitor. Help Please Help please.
Name: Rayburn Date: July 3, 2009 at 22:50:05 Pacific
Reply:
EMachines have cheap power supplies in them which go out prematurely. And when they do, they often end up taking other components out with it. The PS is probably not providing the right voltage for the system to function.
Replace the PS and reseat all the cards. Avoid turning the system on until the PS is replaced because you could end up damaging a component.
Summary: I'm building a new PC. And I believe I have all the wires inside connected correctly. The problem is...I hear it booting up, but the monitor keeps saying "NO SIGNAL" I know the board and chip and ev...
Summary: My computer boots up, but the monitors have no picture. There used to be about a five second delay between the second you pushed the power button and the second you hear the fan turned on. Now the fa...
Summary: So far nothing is helping. To ace omega: I tried before to Control Alt Del after a normal boot up with the blank screen.That doesn' work because nothing works in the normal boot up except holding dow...
0 
