No Signal Input - What is going on?
|
Original Message
|
Name: Michael Lim
Date: September 29, 2002 at 07:11:40 Pacific
Subject: No Signal Input - What is going on?
OS: XP
CPU/Ram: AMD XP1800, 256 DDR
|
Comment: My monitor shows "NO SIGNAL INPUT" on starting up. Only after turning the power off and on several times in a row will the msg disappear. I also noticed that a whirring sound comes from the cpu when the power is turned on, and if it whirs more than once the monitor will show that msg! Athlon XP 1800, 256 DDR RAM, Leadtek GeForce 4 Ti 4400, 250 watt power supply
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Badboy
Date: September 29, 2002 at 08:15:25 Pacific
Subject: No Signal Input - What is going on? |
Reply: (edit)There are many possible reasons but a 250 watt PSU is pretty meager for your system and inadequate power could explain your symptoms.
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Nick Ritchie
Date: September 29, 2002 at 09:44:12 Pacific
Subject: No Signal Input - What is going on? |
Reply: (edit) Maybe Iam way off base here but what you describe as a whirling sound , is the exact sound my system made everytime on bootup , untill I disabled the "search for a new floppy drive each time my computer starts" in system properties ? Is your floppy in working order ? Perhaps the line somehow became unhooked to your M.B., and thats why you are recieving the "No Signal Input" message. There is also a setting to check for a floppy in the BIOS. Good Luck,Nick
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: david
Date: September 29, 2002 at 10:55:48 Pacific
Subject: No Signal Input - What is going on? |
Reply: (edit)that must be some powerfull 250 watt powersupply to keep that 1800 xp cpu going, my 350 watt barely keeps mine running now, any higher cpu than that and Pop! goes something. humm~ maybe you pop something all ready i wonder what it was?
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: gromble
Date: September 29, 2002 at 12:03:52 Pacific
Subject: No Signal Input - What is going on?
|
Reply: (edit)Check the motherboard battery...take it off and then replace it, again...but dont forget to unplug the pc from city electricity...
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: Panic_attack83
Date: September 29, 2002 at 15:30:34 Pacific
Subject: No Signal Input - What is going on?
|
Reply: (edit)Have u checked the graphics card is seated properly that could b a reason4 the monitor showing no signal. Anyway 250W PSU is enough to power it bcos i got 1 powering a XP2000 with no probs :D
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
