Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

no post after 2nd CPU installed

Name: Outlander
Date: March 31, 2009 at 08:18:00 Pacific
OS: Windows XP
CPU/Ram: P3
Product: Hewlett-packard / Kayak xm600
Subcategory: General

Comment:

Okay got an odd one for you guys. I have an HP Kayak motherboard and it functions just fine with 1 CPU installed and a terminator in the second CPU slot. I have a few 1ghz P3 cpu's and I installed a second one in the motherboard and it will not post with it installed. I have tried swapping the CPU's around and it will only boot with one of them installed with a terminator card in the other slot, add a second CPU and no boot. Anyone else own a Kayam 600, and have had this issue? thanks. PowerMac 9600(1 ghz G4) 512mb RAM 50gb SCSI ATi 9200 PCI

Name: StuartS
Date: March 31, 2009 at 09:25:56 Pacific

Reply:

The two CPUs have to be identical, right down to the revision and stepping levels. Stuart

0

Name: Outlander
Date: March 31, 2009 at 16:17:34 Pacific

Reply:

They are. PowerMac 9600(1 ghz G4) 512mb RAM 50gb SCSI ATi 9200 PCI

0

mp3 file have changed

Ram config

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: I bought a Micron Gobook2 300mhz off ebay, well actually two of them but will get to that later. The first posted when I received it (its been stripped of hardrive and main battery). I stuck in a hard...

Summary: i've got exactly the same prob!!! with an MSI Neo board and a Athlon64 chip. Fans on CPU and graphics card spin but thats me lot! no power to any other part of the system and no post. bought the CPU, ...

Summary: Regarding AMD Athlon 2600 plus upgrade in MSI board 133mhz - FSB See also your link below, my problem is virtually identical in the problem I am having, both MSI boards exact same CPU, exact same resu...