Computing.Net > Forums > General Hardware > No boot after hard reset

No boot after hard reset

Reply to Message Icon

Original Message
Name: typeslice
Date: September 18, 2005 at 23:20:43 Pacific
Subject: No boot after hard reset
OS: Windows XP
CPU/Ram: 64bit 3200+/1024
Comment:

Ok, anytime I hard reset my computer, like if my screen freezes or what not...it won't boot up after the reset. All the fans/lights will go on..I can hear the hardrive spinning, the cdrom drive will open, but I get no boot beep, and the monitor reads no signal. If i let the computer sit for about 24 hours, and try and start it, it wil boot up just fine and everything is back to normal.
I thought maybe it was the psu, so I installed a new one today, and low and behold, the computer won't boot again. So now I'm waiting until tomorrow to see if it will boot again after letting it sit.
Does anyone have any ideas? Thanks in advance


Report Offensive Message For Removal

Response Number 1
Name: lefty2053
Date: September 19, 2005 at 05:06:11 Pacific
Subject: No boot after hard reset
Reply: (edit)

Sounds like a heat problem. Try cleaning out the case with a can of Air. re-seat all the memory,CPU and graphics card. check all the cables for tightness. If you still have the same problems, try running a memory test on it. memtest86.com

<===Lefty===
AMD 64 3200+
200 GB WD
Geforce 5500FX 256 MB
512 MB Ram Needs more.
Windows XP


Report Offensive Follow Up For Removal

Response Number 2
Name: ham30
Date: September 19, 2005 at 08:37:45 Pacific
Subject: No boot after hard reset
Reply: (edit)

Excellent advice from Lefty.


Report Offensive Follow Up For Removal

Response Number 3
Name: typeslice
Date: September 19, 2005 at 18:56:17 Pacific
Subject: No boot after hard reset
Reply: (edit)

Thanks for the quick responce, going to buy a can of compressed air tomorrow.
I tried moving the memory to different slots today, and when i do that i get error beeps, continuous beeps separated by a second or 2, indicating a psu or motherboard error; however when I move the memory back to the original slots, i get nothing again, no boot and no beeps at all. Could part of the motherboard be fried? if that was the case why would it start fine after sitting for a while?


Report Offensive Follow Up For Removal







Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: No boot after hard reset

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software