I just replaced my powersupply. I am 99.99999% positive everything is hookedup to the power supply (the mother board light is on). The only thing not plugged in is a PCI-E plug (a 3x2) that plugs into next the CPU fan, but my mobo takes the 2x2 which i plugged in. There also is a very tiny cable plug that has thee holes in it. Not sure what that does/where it goes if at all. Now before i hooked it all up and all the fans were spinning so i turned it off. shut the case plugged everythign in and when i hit power it doesnt work at all. now when i turn it on the fans move a little then stop. whats up?

Ok I have three MOBO connections. The one 20pin connecter to turn on the LED light, the 2x2 connection that is near the CPU/Fan, and then there is a single row of 6 pins on the motherboard then when i connect the battery supply to it doesn't work any more. If i dont connect that and turn it on, the psu fan doesn't work either

You should continue with your other thread, not start a new one. It sounds like you bought a crappy power supply. I doubt anyone will tell you Chieftec is a quality brand name. How much did you pay? You should expect to pay at least $50 for a decent PSU, unless you find one on sale...& even then, you have to know what you're buying.

no i just bought an 80$ one....im thinking something isnt hooked up...do you know what that single row of 6 pins on the mobo could be? i just bought an antec psu

http://www.brittanyworgan.com/1.jpg http://www.brittanyworgan.com/2.jpg http://www.brittanyworgan.com/3.jpg pic 1 is the plug that connected to picture 2 (the single row pins) pic 3 is the plug on my new PSU that i guess would plug into 2? but when i do it stops my PSU from working...

Alright i fixed it, just after some readjusting and adding devices one by one...thanks for your help