Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Click here to start participating now! Also, check out the New User Guide.
My Computer will not start
Name: mosesonelove Date: October 5, 2005 at 12:46:30 Pacific OS: 98X CPU/Ram: /256
Comment:
I have a TX pro II mother board. I need to know what it means when you here 20 beeps after press the start button. If it is a memory problem, what type of memory is needed and the maximum amount that can be used?
Name: avp_micro Date: October 5, 2005 at 14:25:49 Pacific
Reply:
What processor are you running?
Your board takes: 72-pin SIMMS and or PC66, PC100, or PC133 DIMMs in either 64 MB or 128 MB sizes (the bigger memory slot)
My guess is you eather have incorrect momory, fried processor or improper jumper settings. tell me what kind of processor you have and ill tell you how the jumpers should be set.
0
Response Number 2
Name: mosesonelove Date: October 5, 2005 at 15:26:22 Pacific
Reply:
I am running PC133 processor.
0
Response Number 3
Name: avp_micro Date: October 5, 2005 at 19:47:15 Pacific
Reply:
OK your JP5 Jumper should be set like this
1 .o.o ^ that sets bus at 66mhz| oooo | 3 o.o. |
JP6 Jumpers(CORE VOLTAGE)should be set at 3.3v
1 .o... 2 .o...
. o .=PINS o=JUMPER
sorry i coulden draw it better. here is a easyer to read version and tells you where the pins are on the board.
http://m571.com/m571/jumpers.htm
so the CPU External clock should be at 66Mhz (JP5)
Summary: My computer will not start, all i get is a long beep lasting approximately 6 - 7 seconds, which will stop and then start again. I hadn't used my computer for about a week, but prior to that it was wo...
Summary: Everytime my I turn on my computer, nothign shows up on my monitor, my computer will not start up, and I hear constant beeps. Please tell me what I can do to fix this. Thanks! ...
Summary: Hi, my computer will not boot from cd-rom, I reset my BIOS to boot from the cd first, and then when my computer starts, it says "booting from adapi or cd-rom" then very quickly it flashes "failure" be...
0 
Radeon vs GeForce
