Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Mustek Scanner
Name: Andre Date: September 15, 2003 at 06:19:39 Pacific OS: Windows xp CPU/Ram: 256
Comment:
Hi! I have a 600 III EP plus Mustek scanner. The light in the scanner remains in the middle of it, because of an improperly shut down and now I don´t know how to get it to its intial position...
Name: buster65 Date: September 15, 2003 at 13:41:43 Pacific
Reply:
Have you tried to disconnect the power from it and then reconnect. If you have and it still remains in the center or near then you may have a broke drive belt or a defective drive motor. You can take the cover off and inspect it and if it is broke it would probably be cheaper to by a new one than fix that one. Look for anything that has popped off like the belt from a sprocket.
0
Response Number 2
Name: XDonJuan Date: September 15, 2003 at 16:44:49 Pacific
Reply:
Evening, I had a similiar problem with my Visioneer scanner. I took it apart and loosened the screws holding the motor in place and then manually moved the scan carraige back to it's normal position. Then tightened the motor screws down. The real problem was that I did not install the driver or scanner correctly as per the exact instructions for XP. Hope this helps, XDon
Summary: hi i am trying to get a driver for a mustek 1200 ub scanner...i have been onto the mustek site and tried to do it from there but it asks to put the original disc in when promted ...if i i had the orig...
Summary: I recently installed a Mustek 1200 III EP scanner. I downloaded the driver and it is 3.1/95/98 compatible. Next I downloaded a trial version of SmartDraw Photo. It is supposed to be Twain compatibl...
Summary: Friend purchased a mustek scanner from a pawnshop and only got the scanner, no disk or nothing. I downloaded the drivers off of the internet and got the scanner working with xp but I only have one app...
0 
