Computing.Net > Forums > General Hardware > Mouse Problem

Mouse Problem

Reply to Message Icon

Original Message
Name: Macwhitey
Date: January 23, 2007 at 20:22:29 Pacific
Subject: Mouse Problem
OS: xp
CPU/Ram: 500/384
Model/Manufacturer: Compaq
Comment:

Hi all,
I recently was playing around with a second computer, when I went to switch back the keyboard, printer, mouse etc. to my "good" computer the mouse did not work on boot up. After messing around with the PS/2 mouse connection a few times it finally started working. I feel the PS/2 connection is going and would like to know if/how I can enable a USB mouse to use going forward. I have a wireless mouse with a USB receiver connection that I'd like to use.
Thanks in advance.
Joe



Report Offensive Message For Removal

Response Number 1
Name: jboy
Date: January 23, 2007 at 21:04:19 Pacific
Subject: Mouse Problem
Reply: (edit)

"if/how I can enable a USB mouse to use going forward."

'Forward'? Not sure what the question is - you'd install that mouse much like any other

Odds are your PS2 port is fine though

I'm not one of those who think Bill Gates is the devil. I simply suspect that if Microsoft ever met up with the devil, it wouldn't need an interpreter


Report Offensive Follow Up For Removal

Response Number 2
Name: Macwhitey
Date: January 24, 2007 at 04:32:34 Pacific
Subject: Mouse Problem
Reply: (edit)

Actually I don't think the PS/2 port is working properly. This is an ongoing problem that seems to be corrected ONLY if the mouse connector is seated in just the EXACT way. I've tried many times and until the connector is just right it is not recongized.
Different mouses were also tried.

"i'd install the mouse like any other" do you mean its as simple as plugging it into my USB port? Will it automayically be recongized? Do I have to change anything in the BIOS?

I used the term "forward" to mean in the furture. I want use the USB ported mouse instead of the PS/2.

Thanks,
Joe


Report Offensive Follow Up For Removal

Response Number 3
Name: jboy
Date: January 24, 2007 at 14:51:12 Pacific
Subject: Mouse Problem
Reply: (edit)

"Different mouses were also tried."

I think you mean 'meeces' - - moving 'forward'... why don't you just try it??

Normally, mouse recognition is automatic, but a wireless device very likely will need its drivers installed

Now (or in the furture) plug in the mouse hardware and run your installation disc or file - since it's a USB mouse, probably a good idea to ensure your USB is enabled and functioning, although one might expect that it is.

Fresh batteries for the mouse are a good idea too


I'm not one of those who think Bill Gates is the devil. I simply suspect that if Microsoft ever met up with the devil, it wouldn't need an interpreter


Report Offensive Follow Up For Removal

Response Number 4
Name: Macwhitey
Date: January 24, 2007 at 17:54:15 Pacific
Subject: Mouse Problem
Reply: (edit)

"Different mouses were also tried."
I think you mean 'meeces' - - moving 'forward'... why don't you just try it?? ??????????????????????????????????????

I'll give it a shot.
Thanks


Report Offensive Follow Up For Removal

Response Number 5
Name: jboy
Date: January 25, 2007 at 00:01:48 Pacific
Subject: Mouse Problem
Reply: (edit)

Well, gosh - in far less time than it took to post any one of these messages, you could have found out for yourself.. it's just a mouse(!)

Presumably it came with drivers, but if not, no harm in trying, the worst that will happen is, "it won't work" - which may well spawn an entire series of new posts: 'quest for the driver'


meeces (for the culturally deprived)

I'm not one of those who think Bill Gates is the devil. I simply suspect that if Microsoft ever met up with the devil, it wouldn't need an interpreter


Report Offensive Follow Up For Removal







Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: Mouse Problem

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software