L7VTA Mo Board and no Sound??
|
Original Message
|
Name: maleboog
Date: March 29, 2003 at 14:17:59 Pacific
Subject: L7VTA Mo Board and no Sound??
OS: WinME
CPU/Ram: Duron/512 DDR
|
Comment: Just picked upi a L7VTA and got a 1 Gig Duron. I got everything to work except the onboard sound. Its AC97, but my book doesnt say which set of drivers to use from the CD. Anyway, I use the CD that came with the mobo, and it loads the drivers fine, and in control panel it says no problem, but when I go to volume control (audio), everything is greyed out, and they all say no device installed?? I have been to the BIOS ad made sure on board sound was enabled. I even updated my BIOS, and still the same thing. So it seems like Wondows is seeing it, but not using it??
I even removed anything, and then it it automatically came up on start up and loaded it into windows as a sound card?? Any help would be appreciated... Curt
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: wawadave
Date: March 29, 2003 at 18:56:14 Pacific
|
Reply: (edit)hello
go look indevice manager under sound and try installing the drivers from there.
allso some mobo,s have a jumper to enable-disable onboard sound look in mobo manual and see if you jumper is set to enable.
allso this sounds like its just not installing drivers but try these things.
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: maleboog
Date: April 2, 2003 at 20:34:55 Pacific
|
Reply: (edit)I tried that...it keeps saying its a Relteck AC97 sound card. It says there is no problems with the drivers, and still doesnt show up when in control panel/sounds/as a device. I disabled it in CMOS and deleted everything I could find, and then enabled it again, and it called it reltek again and still is not there, even though it shows up in device manager
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
