Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
Someone recently gave me one stick of 256MB PC2100. The machine I plan on sticking it in has a free slot with one slot already having one stick of 512MB PC3200. I know if stick it in that my DDR RAM will run at 266 MHz instead of 400. I sometimes run heavy applications like Adobe After Effects and Premier and I don't know if the benefits of having that extra 256 MB will outweigh the decrease in speed. My question is should I put in the PC2100? Would their be a noticeable performance increase or decrease?
Here is the relevant information from CPU-Z:
CPUID Output
--------------------Number of CPUs 1
APIC ID 0
Name AMD Sempron 3100+
Code name Paris
Specification AMD Sempron(tm) Processor 3100+
Family/Model/Stepping FC0
Extended Family/Model F/C
Brand ID 34
Package Socket 754
Core Stepping DH7-CG
Technology 0.13um
Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2
Features NX
Clock Speed 1808.3 MHz
Clock multiplier x9.0
HTT Bus Frequency 200.9 MHz
P-Rating 3100+
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1808.3 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 128 bitsChipset
--------------------Northbridge SiS 760 rev. 02
Southbridge SiS 964 rev. 36
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 512 MBytes
Memory Frequency 200.9 MHz (CPU/9)
CAS# 3.0
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 8
Bank Cycle Time (tRC) 11
DRAM Idle Timer 16
Command Rate 1TMemory SPD
--------------------DIMM #1
General
Memory type DDR
Manufacturer (ID) Hyundai Electronics (AD00000000000000)
Size 512 MBytes
Max bandwidth PC3200 (200 MHz)
Part number HYMD264 646DP8JD43
Serial number FFFF1020
Manufacturing date Week 32/Year 05Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
EPP noTimings table
Frequency (MHz) 133 166 200
CAS# 2.0 2.5 3.0
RAS# to CAS# delay 2 3 3
RAS# Precharge 2 3 3
TRAS 6 7 8

well good news is you added more meory the bad news is it will decrease your preformance and since you are running programs that use preformance then it would be a bad idea.
AMD Athlon 64 X2 4400+ OC 2.7ghz
2GB Dual Channel DDR 3200
Nvidia 7800GT
SATA II 2x 200gig 7200rpm 16mb cache RAID-0
Gigabyte Nforce 4 SLI

dido...unless your page file is like 500 megs all the time i think the preformace would be better w/o the 256
back up your back up...i just lost 300 gigs of "back up" and i don't have the originals for a lot of it.

![]() |
![]() |
![]() |

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |