Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Is my CPU overheated?
Name: Bodart Date: August 22, 2002 at 14:11:39 Pacific
Comment:
I've had a problem with a noisy CPU fan (ORB). Sent it back and got a new one (Arctic Super-Silent 2000). After installing, my PC wont boot up. No POST, no signal to the monitor, fans are working, HDD makes some noise, and ALL three keyboard leds are on.
Question is: could my CPU be overheated? I've reseated the Arctic.
BTW, how can I see if a CPU is overheated? I can't find a clear picture of it on the web.
Name: tru Date: August 22, 2002 at 14:30:28 Pacific
Reply:
It could be overheated. Sometimes they can break also if you put to much pressure on them when applying the heatsink(did you replace the heatsink?). I've never burnt one out so I dunno how they look but I'd imagine it would have some black charring on top of the processor.
0
Response Number 2
Name: roamingphantom Date: August 23, 2002 at 07:07:42 Pacific
Reply:
it could be that the cpu is fried, maybe you had static on you when you took it out or applied too much pressure. I had the exact same thing happen to me when i changed cpus on my board. Try using another cpu and see if everything works well. Post back and let us know
0
Response Number 3
Name: Paul Date: August 23, 2002 at 18:30:05 Pacific
Reply:
well unless the processor is an old pentium3 500 mhz. or below then the processor can burn up in 2 seconds (thats really all it takes) did you aplly thermal grease or a pad?
Summary: hey all, i need some help, When i go to start my PC, sometimes it freezes right when im in the middle of doing something, I dont think that this is the result of my CPU overheating cause it says its o...
Summary: Ok when I start up my system the fans spin for a second then shut off, when I take out the cpu they continue spinning and no problem as before. I did put Alot of pressure on my cpu when installing ...
Summary: Hello, i changed the motherboard on my old P3 866Mhz. Now, there is a red light on the motherboard, ok, but i can't turn my computer on....I checked everything, the power supply works, i made the rig...