Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Intel 865Perll Mobo and HD LED
Name: Rick Date: September 22, 2003 at 07:30:49 Pacific OS: W2K Pro CPU/Ram: P4 3 Gig/FSB 8--1 gig
Comment:
I just got a new Intel 865Perll MOBO. for some reason, the HD Led does not work; I tired the two extra led's that I have on the cable and nothing. I tried the HD and extra leds on the power pins and they work...is there another way to determine if the pins on the header are gone? Thanks.
Name: frank Date: September 22, 2003 at 09:43:08 Pacific
Reply:
Just in case! The leds have to be hooked up the correct way.
0
Response Number 2
Name: Dirtnapper Date: September 22, 2003 at 10:21:56 Pacific
Reply:
?? I have pin 1 is black and pin 2 is red..as is the case in the two extra led's...all three work on the power pins... the led's all worked fine on the last board last week.
Summary: hi folks, its not realted to my laptop but my old tower.... i have dismantled it and i had a though while doing so, which was 'why not upgrade the PC as much as possible, so that means RAM, graphics, ...
Summary: I would doublecheck the PSU connectors on the mobo and the switches (most of all)... Check that the LED Switches Power Switches etc. are on the right pins... I would assume CPU VGA & MEM are OK ...
Summary: A friend of mine sent the motherboard, CPU, and one of the 3 sticks of RAM back in October cause he no longer needed them and said that they worked. I assembled it in late November. Everything ran b...
0 
