billyjranaya June 10, 2010 at 23:34:18 Specs: Windows XP sp3
what are the input voltages on lcd inverter and what or were are the ground pins is pin cn1 is that a voltage in put cause i dont have voltage in pin 1 should i or ground? lcd inverter dac-08B034 5 pins in put two pins out put on the 5 pin input is one that is f1 or cn1 ok the pin on the other side pin at the end is 0 volts f1 o volts and the ones in the middle are 3.7 volts 3 pins in the middle have voltage 3.7vdc the two out side pins are 0 volts
The information on Computing.Net is the opinions of its users. Such
opinions may not be accurate and they are to be used at your own risk.
Computing.Net cannot verify the validity of the statements made on this
site. Computing.Net and Purch hereby disclaim all responsibility
and liability for the content of Computing.Net and its accuracy.