Computing.Net > Forums > General Hardware > IBM ThinkPad 600E Errors 161 & 163

Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.

IBM ThinkPad 600E Errors 161 & 163

Reply to Message Icon

Name: MichaelN13
Date: November 24, 2004 at 14:05:26 Pacific
OS: Windows XP Pro
CPU/Ram: 400mhz P2, 128mb RAM
Comment:

Hi, I have an IBM ThinkPad 600E which I just replaced the motherboard in. All internal wires/cables are connected properly, but I am getting errors 161 and 163 as soon as I press the power button. The usual IBM ThinkPad logo is not displayed, just my ammount of RAM and the two error messages.
Does anybody know how to resolve this issue or atleast know what the errors mean?
Thank you! Your responses mean a lot to me.



Sponsored Link
Ads by Google

Response Number 1
Name: ddp59
Date: November 24, 2004 at 15:01:23 Pacific
Reply:

did you check manual for post errors & also ibm site for info???

david


0

Response Number 2
Name: Rimfire
Date: November 24, 2004 at 15:55:27 Pacific
Reply:

These indicate configuration changes. You did remember to set up the CMOS, didn't you?


0

Response Number 3
Name: Tbird4point6LX97
Date: November 24, 2004 at 20:11:11 Pacific
Reply:

cmos battery is dead
cmos battery can be found on ebay for about $10 and it is located within the memory compartment and it's attached via a small wired connector...i already changed one out for a co-worker on a 600e

Abit AS8 LGA775 2.8 Prescott
2 x 512 OCZ Platinum PC3200 dual channel
128 meg Radeon 9800 Pro
DUAL 36 GIG WD Raptors Raid 0
DUAL 21 in. 19.8 viewable Sony Trinitrons
3+ Mbps cable con


0

Response Number 4
Name: MichaelN13
Date: November 25, 2004 at 05:53:33 Pacific
Reply:

I didn't have the time to order one, so I used another CR2025 battery new from RadioShack and then I had to set the time. Thanks for your help!
Works like a charm!


0

Response Number 5
Name: MichaelN13
Date: November 25, 2004 at 06:58:43 Pacific
Reply:

This just happened about 3 hours ago:
I'm now getting the error "Applications or Devices disabled..." error in my notification area of my taskbar. This happens to disable my sound card drivers. I have tried to uninstall my drivers, install new ones (and old ones) but no driver works. Is there a way to disable this "Applications and Devices disabled..." error altogether, and keep my sound card functioning? Thanks again.


0

Related Posts

See More



Response Number 6
Name: Tbird4point6LX97
Date: November 25, 2004 at 19:20:02 Pacific
Reply:

can't help you there

Abit AS8 LGA775 2.8 Prescott
2 x 512 OCZ Platinum PC3200 dual channel
128 meg Radeon 9800 Pro
DUAL 36 GIG WD Raptors Raid 0
DUAL 21 in. 19.8 viewable Sony Trinitrons
3+ Mbps cable con


0

Response Number 7
Name: pppsyang
Date: December 3, 2004 at 09:00:21 Pacific
Reply:

Do you think you got those errors because of the new CMOS battery? How did you solder the wires on the battery? It would be much cheaper if we can do that.


0

Sponsored Link
Ads by Google
Reply to Message Icon

Computer Restarting? PSU ... BIOS does not start



Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.


Go to General Hardware Forum Home


Sponsored links

Ads by Google


Results for: IBM ThinkPad 600E Errors 161 & 163

Problem booting up IBM Thinkpad 600 www.computing.net/answers/hardware/problem-booting-up-ibm-thinkpad-600/41506.html

Problems wik IBM Thinkpad 600E www.computing.net/answers/hardware/problems-wik-ibm-thinkpad-600e/44381.html

Thinkpad - 161 and 163, and ERROR www.computing.net/answers/hardware/thinkpad-161-and-163-and-error/50045.html