|Take it out and put the old ram back in .|
Ram that works in another mboard , or any ram you buy or have lying around, may not work properly, or sometimes, not at all - even if it physically fits and is the right overall type (e.g. SDram, DDR, DDR2, etc.; PCxxxx, xxx mhz) for your mboard. In the worst cases of incompatibilty your mboard WILL NOT BOOT all the way with it installed, and the mboard may not even beep - the ram has to be compatible with the mboard's main chipset, or in the case of recent mboards, compatible with the memory controller built into the cpu.
If you still have the ram that was installed when the system worked fine, try installing just that ram.
See response 5 in this for some info about ram compatibilty, and some places where you can find out what will work in your mboard for sure:
Correction to that:
Once you know which module ID strings (part numbers) work in your mboard, you can get them from anywhere you like that has ram with those ID strings.
If you already have ram...
If you have brand name ram, it is usually easy to look up whether it's ID string (part number) is in a list of compatible modules found by using your mboard or brand name system model number.
If the ram is generic, that may be difficult or impossible.