Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
HP 845c printer
Name: Harry (by Hugger1) Date: December 31, 2002 at 07:57:29 Pacific OS: 98SE CPU/Ram: 500 MHz / 192 Mb RAM
Comment:
Hi all. My g'f's printer has an annoying habit. Whenever the PC is shut down and restarted later, it loses the settings / path for the printer. I either have to remove and reinstall the drivers or recapture the printer port. The error I get is :"There was an error writing to USB / DeskJet 845_CN18Q1P3G5SX for the printer (hp deskjet 845c series): The printer is not ready. make sure it is turned on and online. To continue printing, click retry. Windows will automatically retry after 5 seconds" Any ideas?
Name: Joemys Date: December 31, 2002 at 16:13:16 Pacific
Reply:
In 98Se I had the same problems with a HP950 and a Xerox M750 useing USB so I went back to useing a parallel cable .No more probs! But if you want to keep useing USB try the newest drivers and follow the HP USB installation Guide closely. Joe
Summary: What you need to do besides putting in printer driver is you have to have the program to go along with it. This is what keeps the settings on your/ her machine. ...
Summary: I have an HP D135 printer that when you turn it on, all the lights on the panel start blinking and the display reads to turn power off and on. Every time I turn power off, then on again, I get the sa...
Summary: How can i make my HP 6122 Printer default to Draft mode and NOT fast Normal. If i change it in printer setup it reverts back to fast normal the next print job. ...
Name: Harry (by Hugger1)
0 
