How to fix a gate way PC that is stuck on gateway screen
Burlyfish January 8, 2016 at 02:54:47 Specs: Windows 7
OK I just had this issue very easy to fix when bios starts it is having a brain fart and need to be reset to factory default. so step 1 make sure power is disabled and find the CMOS Battery .2 Remove battery 3 Look for CMOS jumper plug mine is red small square shaped plug that jumps 2 pins out of the 3 pins at that location .4 Look close before you remove the plug as to what pin is exposed then remove plug and replace it so it cover the center pin and the one that was exposed .That will drain out any power left in the unit and reset bios.5 wait about 5 minutes ( maybe less but don't push it ) Then Put the jumper plug back into its normal position. After that simply add power source and boot should be fixed . also you might want to replace the CMOS battery if problem comes back
The information on Computing.Net is the opinions of its users. Such
opinions may not be accurate and they are to be used at your own risk.
Computing.Net cannot verify the validity of the statements made on this
site. Computing.Net and Purch hereby disclaim all responsibility
and liability for the content of Computing.Net and its accuracy.