Do you know how to boot into BIOS Setup ? That is where you make the permanent change to boot order. I usually have mine set to Floppy first followed by CD then Hard Drive. It sounds like you have only the floppy selected in BIOS and you then manually select the HD option when it fails to find a bootable floppy in the drive. If you set them as 1=floppy, 2= CD & 3=Hard Drive then when you boot up if there is no floppy disk it autmatically tries the next option etc until it finds the HD.
The information on Computing.Net is the opinions of its users. Such
opinions may not be accurate and they are to be used at your own risk.
Computing.Net cannot verify the validity of the statements made on this
site. Computing.Net and Purch hereby disclaim all responsibility
and liability for the content of Computing.Net and its accuracy.