Tom's Guide | Tom's Hardware | Tom's Games
 |
 |
 |
Hi,
The screen on my Laptop Fujitsu Siemens Li 2727 intermittently flickers. When I move the screen back and forward to a specific position it stops.
It looks like the screen cable may be loose. Is it possible to fix this myself? any disassembly instructions or other solutions please?
Thank You in advance
... read this (< click)
.
.
... Posting is provided "AS IS" with no warranties
http://img515.imageshack.us/img515/...
Grrrr... ....more
0 
Thank You for taking the time to post, but Im afraid I still have the same problem.
Any other solutions please? a manual to disassemble would be great. I'v tried to search on net but cannot find one. Any help would be appreciated.
0
"...disassembly documents are available only for certified servicepartner..."
... you could try link in "Response Number 1" scroll to bottom of page then click "Go" @ bottom right!http://support.ts.fujitsu.com/com/s...
**********************************************
(1)... Click on the Start button (orb).(2)... Type "Task Scheduler" [press ENTER].
(3)... On the left-hand side, click "Task Scheduler Local"
(expand "Task Scheduler Library," then "Microsoft," then "Windows," then click "MobilePC.")(4)... Up top, you'll see a task called "TMM." Click it, and on the right-hand side, click "Disable."
********************************************.
.
... Posting is provided "AS IS" with no warranties
http://img515.imageshack.us/img515/...
Grrrr... ....more
0
Hi there,
I have exactly the same laptop as you, and the same problem,
mine started a few months ago and got worse, and would flicker
without me even touching it, luckily i had to years insurance on
it, took it back to comet and they fixed it supposedly and has
been in 3 times for repair and still nothing done to it. have you
managed to fix yours yet?
0
Hi, I didn't find any useful disassembly instructions so I tried to do it myself (not recommended).
I was hoping that maybe the screen cable was a little loose and all that it needed was to tighten it. So I disassembled it slowly and managed to get to the cable connection, which seemed fine, not loose or anything.
Connected the battery to see if anything had changed but it was still the same as before.
I didn't do anything else whatsoever, tried to switch on a second time to check again, but it did nothing, didn't even switch on. I have no idea what is wrong with it but it is not even turning on.
Checked all cables, their fine. Tried a different memory, hard drive, power supply, cmos battery etc, but Nothing. I suspect it maybe the motherboard which has gone awol, but not sure.
No idea whats wrong with it and absolutely fed up with it now. Will have to sell it as spares and/or repairs as I havent the time or the patience to fiddle about with it any more.
Sorry I wasn't of any help
0
if your laptop is under warranty and u are having the same problem WHY did u take it apart THIS WILL VOID THE WARRANTY????? simply contact them or suffer more
0
Hi, I dont think it had any warranty, not that i am aware of anyway. I purchased it from ebay. The seller also purchased it from another seller (he told me that). Looks like it changed hands a few times, possibly because of the screen fault.
If I spend some more time, I may find why it is not switching on anymore, but as I said before I havent the time or the patience to do it.
0  |
 Power button is inconsist...
|
internal monitor card bad
|
| Login or Register to Reply | |
| Login | Register |
| Ads by Google |
