Computing.Net > Forums > General Hardware > Front Panel audio/mic connection

Front Panel audio/mic connection

Reply to Message Icon

Original Message
Name: artkitt99
Date: December 12, 2004 at 02:15:45 Pacific
Subject: Front Panel audio/mic connection
OS: XP/PRO
CPU/Ram: 1.0g amd / sempron / 512d
Comment:

I bought this new case which has an audio and mic plugs on the front of case.
My motherboard is a PC CHIPS M825G, It does have the pins to connect the audio and mic from the front of the case but the case only has 5 wires, SPK-R, SPK-L, GND, MIC(Red color wire), and GND.
According to the Board's manual I need to remove the jumper caps from pin 5-6 and 9-10 but I don't know where to put the wires from the case, since the case only have 5 wires and the manual shows more.
Whats on the manual its not what I have coming from the front of the case.
this is what the manual shows:
1- AUD_MIC / 2- AUD_GND
3- AUD_MIC_BIAS / 4- AUD-VCC
5- AUD_FPOUT_R / 6- AUD_RET_R
7- HP_ON / 8- KEY
9- AUD_FPOUT_L / 9 AUD_RET_L

Does anybody know if the wires from the front of the case have to match to the ones that the manual shows? my case only has five wires.
I'll appreciate any help.
Thanks


Report Offensive Message For Removal

Response Number 1
Name: ddp59
Date: December 12, 2004 at 09:51:37 Pacific
Subject: Front Panel audio/mic connection
Reply: (edit)

SPK-R to 5- AUD_FPOUT_R , SPK-L to 9- AUD_FPOUT_L , GND to 6- AUD_RET_R & 9 AUD_RET_L, GND to 2- AUD_GND, MIC(Red color wire) to either 1- AUD_MIC, 3- AUD_MIC_BIAS or 4- AUD-VCC

david


Report Offensive Follow Up For Removal







Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: Front Panel audio/mic connection

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software