Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Epson C64 Printer
Name: Petlydecker Date: February 23, 2004 at 20:21:34 Pacific OS: WindowsMe CPU/Ram: Athlon XP 2100+/512
Comment:
Hello:
I am running a Biostar M7NCD motherboard with NVidia NForce chipset drivers and WindowsMe. I just purchased a new Epson C64 inkjet printer with a USB connection. The driver and printer software are installed correctly. My problem is with the port that the printer works with. It is called EPUSB1: (EPSON Stylus C64). When I reboot my system and try to use the Epson utility to print a test page I recieve a message saying windows can't send the page to the printer. If I use the details option in the Epson utility and change the port to something like Com1 and then back to EPUSB1: (EPSON Stylus C64), it prints. Does anyone have any insight or advice as to what is going on. I called Epson tech support and they could only advise me to remove and install the driver again. I found this changing of the ports on my own. Any help would be appreciated.
Summary: My Epson 777 printer starts to print a page and then just stops and rejects the page and tries to continue on another sheet but sometimes it just keeps running paper through and will not continue prin...
Summary: Hi all, I have a Epson C82 printer and it does not wont to print. The black ink was running low so I fault that I would wait until the red light came on the printer, the red light is up now but when I...
Summary: Hi, I am trying to get a EPSON TM-T88iii printer to print from my PC (windows XP SP2). The printer has a centronic port/cable with a male connector on the other end. I believed this is a parallel int...
0 
Severe error msg when ins...
