Computing.Net > Forums > General Hardware > CPU overheating

Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.

CPU overheating

Reply to Message Icon

Name: philipl
Date: August 16, 2003 at 23:30:42 Pacific
OS: windows 2000
CPU/Ram: 256
Comment:

I have a question about the CPU fan.
Is that fan blowing air to the cpu or the other way?
And my CPU is too hot...62.5 degrees in idle...
What should I do?
It is an AMD XP1800
Thanks,~



Sponsored Link
Ads by Google

Response Number 1
Name: Janos
Date: August 16, 2003 at 23:51:07 Pacific
Reply:

Hi Philip

You right that is far to hot for the 1800.

Few things though , I presume you have fitted the processor and heat sink ?

Remove it, clean the residue from the thermal pad, and apply a thin coat of thermal paste on the heat sink and the cpu.

Reposition the heat sink, but make sure that it is sitting 100 % square on top of the cpu.

Check your casing ventilation, and if neccessary ad an extra exhaust or intake fan, to increase air circulation thorough the case. If not done already.

If your mother board supports the smart variable speed setting increase the thermal throttling in the bios so the mobo can increase the fan speed sooner than normal.

If all that fails, I sugest you look at a after market cooler, such as the Thermaltake Volcano 10+ or 11. In adition have a look at the new line of Zelman cpu coolers also.

I presume that your board is not Overclocked. If it is than the aftermarket coolers are almost a must.

Hope that helps.

Janos


0

Response Number 2
Name: electron2059
Date: August 17, 2003 at 06:00:24 Pacific
Reply:

Hi,

62.5 degrees is a bit hot, but you shouldn't have a problem till it gets to about 85 degrees celsius. Removing and reseting the heat sink is a good idea. Try using some arctic silver 3 instead of the normal thermal paste. Just remember you only need a little amount of paste, about the size of a piece of rice. If you decide to change your heatsink try looking on www.newegg.com for a good price. The Speeze FalconRock CPU Fan Model 5F286B is a good fan for a cheap price. It can even handle some light overclocking. If you want a good overclocker try a thermaltake or vantec cooler, but be aware they a usally quite loud.


0

Response Number 3
Name: rac
Date: August 17, 2003 at 07:54:20 Pacific
Reply:

If you put thermal paste on BOTH the heatsink and the cpu as suggested in the first post, there is a very high probability that you will end up with too much. Apply it to ONE surface only!


0

Response Number 4
Name: C_Legend
Date: August 17, 2003 at 14:02:22 Pacific
Reply:

I believe the fan should blow onto the CPU and not away from it. Also, please mention Celcius or Fahrenheit in referring to temperatures. To me, 62.5 is very cool, although I expect Fahrenheit if Celcius is not specified.


0

Response Number 5
Name: rac
Date: August 17, 2003 at 18:02:41 Pacific
Reply:

Rear case fan should exhaust the air; front case fan intake; if you have an interior fan, it should move the air toward the exhaust case fan.


0

Related Posts

See More



Sponsored Link
Ads by Google
Reply to Message Icon






Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.


Go to General Hardware Forum Home


Sponsored links

Ads by Google


Results for: CPU overheating

cpu overheating www.computing.net/answers/hardware/cpu-overheating/9444.html

CPU overheating www.computing.net/answers/hardware/cpu-overheating/15238.html

is my cpu overheating? www.computing.net/answers/hardware/is-my-cpu-overheating/19625.html