Computing.Net > Forums > General Hardware > computer shuts down after new psu.

computer shuts down after new psu.

Reply to Message Icon

Original Message
Name: kijjy
Date: October 11, 2007 at 22:12:16 Pacific
Subject: computer shuts down after new psu.
OS: win xp home
CPU/Ram: p4 3.2ghz 1.5gb ram
Comment:

recently got a case from a friend for cheap. has a 600w lead-power psu. computer specs r.
pentium 4 prescott 3.2ghz 800mhz fasb 2mb cahce
geforce 6800 gt
80gb hdd 1.5gb ram. now prior to switching cases and psu. i was using a (gasp)250w psu for a few feeks. computer ran perfect.

but now, computer shutsdown during gaming, and is hard to ge turned on again. ie i have to flip the toggle switch off. and try and turn on the computer. is my psu shot. there is 24a on the 12v rail. 3 case fans. i can only game for about 10-30 mins before my comp shuts off.


Report Offensive Message For Removal


Response Number 1
Name: Cobra_R
Date: October 11, 2007 at 22:39:05 Pacific
Reply: (edit)

Take it back seems like the psu is flawed.


Report Offensive Follow Up For Removal

Response Number 2
Name: cliffpage
Date: October 11, 2007 at 23:33:18 Pacific
Reply: (edit)

i had one where i could only get it to switch on by flicking the psu switch to kind of cause it to spark/arc inside. It was definitely faulty psu, replacing the psu cured the problem.


Report Offensive Follow Up For Removal

Response Number 3
Name: cliffpage
Date: October 11, 2007 at 23:35:39 Pacific
Reply: (edit)

further to my message above, and it definitely was not a faulty switch, i thought it was but i took the psu apart and by-passed the switch and found it did not help


Report Offensive Follow Up For Removal

Response Number 4
Name: Mike Newcomb
Date: October 11, 2007 at 23:39:57 Pacific
Reply: (edit)

This sounds like a heat problem. Quite possibly within the new psu as Cobra suggests.

With the power *DISCONNECTED* check inside the psu to see if clean. If not, blow out with a hairdryer set to cold and max blast. Use a long thin brush to assist. Also clean the psu fan blades if necessary.

Are all fans in pc and psu working ok and blowing/sucking as expected.

Were any heatsinks displaced during the move.

Once pc fails you should wait for it to cool before trying to restart. Flipping toggle switch could cause damage.

Advise how you progress.

Good Luck - Keep us posted.


Report Offensive Follow Up For Removal

Response Number 5
Name: kijjy
Date: October 12, 2007 at 06:34:05 Pacific
Reply: (edit)

all the fans r working. the psuu fans as well. heat sink is seated correctly on the cpu and cpu fan is clean


Report Offensive Follow Up For Removal


Response Number 6
Name: jam
Date: October 12, 2007 at 13:28:15 Pacific
Reply: (edit)

How about posting the system & CPU temps...that way we can rule out overheating.

Otherwise, do you have another PSU you can try? What brand name is the 600W? Did you have it out of the case...if so, would you say it's heavy or lightweight? If it's heavy, it generally means it's made from better components & has decent heatsinks. Lightweight basically means the opposite. And a lightweight unit would be more likely to overheat.


Report Offensive Follow Up For Removal

Response Number 7
Name: kijjy
Date: October 12, 2007 at 17:41:06 Pacific
Reply: (edit)

was a lead power. idle temp on cpu in windows doing nothing is 33C. during gaming depending on the game. 50-59C. anyways psu was light. i bought a codegen 450w. feels alot heavier then my other psu plus it cured the problem so thanks for the help guys/gals.


Report Offensive Follow Up For Removal






Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: computer shuts down after new psu.

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software




Have you ever used OpenOffice?

Yes, as my main suite.
Yes, occationally.
Yes, but only once.
No, never.


View Results

Poll Finishes In 6 Days.
Discuss in The Lounge