Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Computer LCD shows No signal
Name: Naresh kumar Date: July 21, 2009 at 09:18:09 Pacific OS: Windows XP Subcategory: BIOS
Comment:
My Computer shows No signal in my house but when i try it in other's house with the same LCD and same CPU and cables then it works without any issues it only shows the error message in my house.can anyone help me out please.
Not sure what the CPU has to do with it? THIS is a CPU...THIS is a computer/tower.
If your monitor says "no signal", it means it's not receiving any input (signal) from the video card. The problem isn't with the monitor, it's with something inside the computer/tower.
0
Response Number 2
Name: aegis1 Date: July 21, 2009 at 12:37:24 Pacific
Reply:
Maybe the fuse for the circuit that you are using in your house is blown.
Maybe a poor connection is jiggled and makes/breaks when you move the box, and it just happened to make when tried at the other house.
Summary: Message: So I just added in an old 120gb hard drive to recover some old files which was successful. I booted up my computer successfully five times before it would turn on- but not show a signal. I ge...
Summary: On booting my emachines 620 the monitor shows no signal. I have tried two different monitors the message is the same. The fans are all running and the flash light is on and steady no flashing. I have ...
Summary: I'm having an intermitent problem - The computer tower will boot up... the monitor may show the boot up then all of a sudden it shows "no signal" and goes blank. This happens at various times during...
0 
