Compaq Presario Disable Onboard Vid

April 4, 2006 at 19:10:29
Specs: 98SE, 350 / 512

How can i disable the onboard video, I dont have the original manual so i dont know which jumpers to change, Would like to put in a diferent card.

See More: Compaq Presario Disable Onboard Vid

Report •

April 4, 2006 at 19:27:12

Issues with adding new video card to computer that has on-board video

Luke Chi

Report •

April 5, 2006 at 00:14:08

Hi, Most MBs today do not have jumpers. Some allow you to turn off the Video in the BIOS SETUP and some are automatic. Check your MB manual if you have it or go to the maker's Web Site and check it out. Luck, Jim

Report •

April 5, 2006 at 03:22:39

Report •

Related Solutions

April 6, 2006 at 07:33:17

most likely it will "disable" automatically when it sees a video card. many newer systems do. if not, look for video-related settings in the BIOS, and change it there.

HP Vectra VL400
1.0ghz Pentium 3
512mb PC133 SDRAM
120gb 7200rpm 8mb cache WD1200JB hard drive
ATI Radeon 9200 128mb AGP video card

Report •

April 6, 2006 at 16:38:55

thanks for the help, i will see if that works, the thing is this is not a very new PC, and when i have tried to install the aditional Gfx card, it says it cannot be used because of the on board.

But i will give these ideas a try. thanks

Report •

Ask Question