Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Click and burn took out my cdrw
Name: madmaven711 Date: December 15, 2005 at 18:45:34 Pacific OS: xpw/sp2 CPU/Ram: P3 800
Comment:
I set up my laptop , installed Xp with SP2 norton antivirus everything was fine. I then installed click and burn and the patch for higher speed CDRW drives,. after this the drive was no longer recognized in my computer. It had a yellow exclaimation point on it in the device manager. I tried system restore would not restore to any eralier point. tried uninstalling and reinstalling the device, tried rolling back the driver. when I go to properties for the CDRW A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. COde 32. The drive does not work. any suggestions. I uninstalled the click and burn software that did not help. I replaced the selectabay CDRW with a DVD drive and have the same problem.
Summary: Had lightning last night and it took out my 2Wire router. Everything in plugged into a surge protector (except the router wasn't last night) I dug out my old DSL modem to get connected today. Questio...
Summary: ok well i took it down, and they took out my old 2 sticks, and put in 2 of the same sticks, they didnt work so i got 4 brand new sticks, ive run memtest 86 and it says the ram is not faulty. ive tried...
Summary: Hi all, OK i believe i might have pin pointed the problem. First i removed my graphics card to isolate the issue. Tried to power the PC on, still nothing. So i removed the new Zalman ZM600-HP 600W Pow...
40GB excelstor hdd report...
