I have bought a new computer today. I installed the parts correctly ( according to myself :) ) but i can not get a display on monitor my system is
Mainboard
MSI 970A-G45 AMD DDR3 2133 MHZ SATA 3.0 usb 3.0Graphics Card
hd6850 GDDR5 1gb 256bit AMD Radeon DX11Processor
FX X4 4100 Soket AM3+ 3.6 Ghz 12 Mb Cache 32nm AMDRam
4GB XMS3 DDR3 1600 MHZ CL9600W Thermaltake power supply
HDD
1TB SEAGATE HDDWhat can i do? Thanks...
Do you see any video when you first start the computer? A message stating "no signal"? Do you have mounting standoffs under every mounting screw and ONLY under mounting screws?
Did you connect both the connectors listed below?
1 x ATX 24-pin power connector
1 x ATX 8-pin 12V CPU power connectorDid you connect the CPU fan to the header marked CPU fan?
Did you connect the auxiliary power connector to the graphics card?
Do you hear any beep codes when you start up?
Clear the CMOS by using the jumper while the computer is unplugged.
Did you benchtest your hardware 1st? or did you throw it all in the case & then try powering up? Benchtesting is a critical step that should NOT be skipped. Now you have no idea what the problem is - could be a hardware problem, could be an installation problem.
