Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
boot failure
Name: allen Date: February 23, 2003 at 18:22:58 Pacific OS: xp CPU/Ram: 450 384ram
Comment:
When booting up, I get a message saying: error- set date and time/run configuration utility. But, it won't let me into setup. The screen freezes. Do you have any suggestions? Thank you in advance.
Name: jdcotr Date: February 23, 2003 at 23:40:02 Pacific
Reply:
Try clearing the CMOS, it should tell you how to do this is your M/B manual or on the manufacturers website.
0
Response Number 2
Name: Allen Date: February 24, 2003 at 08:39:30 Pacific
Reply:
I tried clearing the cmos, but it didn't change anything. I still get 2 beeps and and error message. It won't let me into startup. Again, thanks for any advice.
0
Response Number 3
Name: Mr C Date: February 26, 2003 at 23:39:06 Pacific
Reply:
1.How do I clean my cmos. 2.I cannot boot my win98 anymore.It started with giving a false cpu value,half less than what I have. 3.Tried to reinstall win98,format-partition-set partition active-format c:/s/q still cannot get c:prompt after setting up DOS. What I am I doing wrong?
Summary: I had my computer built for a while running without a problem, then my HD broke,(had case open and something hit it, made it skip etc..) Since then I have purchased a new HD, I bought a Western Digita...
Summary: Hi, i currently built a new pc using the msi motherboard kt3 ultra-aru, but i'm having problems when booting up, firstly it starts a program called MBFastTrack, scans for ide devices, then says no arr...
Summary: Upon a cold boot the system performs the POST and after verifying DMI pool data and checking the boot devices (CD and DVD) the system refuses to boot, instead giving me the message DISK BOOT FAILURE o...
0 
Display problem, Tosh Sat...
