Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Asus A7N8X-Delux2.0
Name: Silent J Date: June 26, 2003 at 14:48:44 Pacific OS: XP Pro CPU/Ram: Athlon XP 2600+
Comment:
Just got an Asus A7N8X-Delux (PCB version 2.0, Bios Rev 1004).
My Athlon 2000 works great in it but only gets detected as a 1250MHz (I believe it's supposed to be 1.67GHz). The Athlon XP 2600+ does not work at all in it. It seems to be booting normally but I get no video at all.
A confirmation that it's booting normally (or at least POSTing) is when I pop the 2000 back in I get alerted that the CPU has changed.
The only jumpers on this board that are relavent to the cpu/bus is a jumper that toggles between an autosensing 400/333/266 or strict 200Mhz only. This issue happens regardless of how this is jumpered.
Any ideas?
ps. yes, I have the latest bios rev and the xp 2600+ is supported under that bios rev.
Name: keefabear Date: June 26, 2003 at 15:47:47 Pacific
Reply:
set fsb in the bios to 133, or jumpers to 266
0
Response Number 2
Name: keefabear Date: June 26, 2003 at 15:50:05 Pacific
Reply:
also sounds like a faulty m/b
0
Response Number 3
Name: Adam Date: June 26, 2003 at 21:28:59 Pacific
Reply:
Just a note to remember, the A7N8X doesn't like changes, pop the new cpu in, if it fails to start, reset the cmos and try again. Also, ensure that the cpu cooler is installed correctly.
Summary: I have an ASUS A7N8X-E Motherboard. The manual says it comes with 4 DDR memory sockets, however,the diagram in the manual only shows 3. There are only three memory sockets on the board. Strange. I pur...
Summary: Ok I went and done it! I decided to shoot the moon. The question is how to setup mirror and stripping both and how many harddrives to do it on Asus A7N8X-E (Deluxe). The motherboard manuals for asus s...
0 
