Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
486 motherboard jumper settings
Name: Coos Bay Lumber Date: February 15, 2003 at 13:54:54 Pacific OS: none CPU/Ram: 33/4
Comment:
Am trying to revive an old 486 computer with another $1 special motherboard to which I need to set all the jumpers to configure. The motherboard is an Edom International model MPV032/486VL3 and a picture of such is noted below.
Does anyone have the information to post for me? Its going to be used for some simple old DOS work, so I don't want to go too far with it.
Name: ryan Date: February 15, 2003 at 14:46:49 Pacific
Reply:
you can search online for this board's information.
0
Response Number 2
Name: egkenny Date: February 15, 2003 at 15:14:35 Pacific
Reply:
This is the closest I could find. There is not much information on Edom motherboards anymore.
EDOM INTERNATIONAL CORPORATION 486VL3 (MP032F) http://www.elhvb.com/mboards/edom/txt/MP032F.txt
0
Response Number 3
Name: William Date: February 15, 2003 at 17:28:32 Pacific
Reply:
I had tried a search on net using Dogpile. Most sites were dead links, a few were "we may have a page of two, it will cost you, and we may no promises that what we have is accurate of not", by many applied to either the very early version or the last version (MP032F). I have one in the middle built about 1994.
Summary: Hi all, could anyone help me with the following? I am making adjustments to an old computer. The motherboard is a GMB-P56SPC (Gemlight) and the processor is a 233mhz MMX. Unfortunately the speed it is...
Summary: I have an old motherboard "486 Socket 3" with a Am486 DX2-66 processor. I have 2 other processors, Am486 DX4-100 and one marked on bottom digital Model PCXAU-AA and DX4 100M/33 on the side. I was wa...
Summary: Every time I try to select using my hard drive on its own as the master it will boot up and then go to a blank screen with a blinking cursor and do nothing else. However, when I sue it as a slave with...
0 
New Asus A7S333 + PC2700 ...
