Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
Hi, i bought SH3 for PC. Every time the game start, it freezes on the screen that says "some part of the game may consider violent." it freeze there, and never continue to the main menu. I have upgraded the latest video card software, but couldn't help.
Silent hill 4 runs perfect on my PC…I have already tried the troubleshooting in the manual:
PROBLEMS LAUNCHING THE GAME
If you are having difficulty launching the game:
1) Close any other applications that are running on your PC, including applications in the system tray.
2) Make sure that DirectX 8.1b is installed on your system. Due to size limitations on the CD-ROM, DirectX 8.1b is not included with the demo version, but you can download it from http://windowsupdate.microsoft.com.
3) Make sure to update your graphic card drivers to the latest drivers available.
If you continue to have difficulties launching the game, please read through the information listed below:
Q: Do you have a Kenwood multi-beam CD-ROM drive?
These drives can have older firmware which will cause problems reading the CD. If you CD-ROM drive is the Kenwood ICR-412 or Kenwood UCR-401, and the firmware is older than version 132, you will need to upgrade the firmware. The firmware update is available from Kenwood at:
http://www.kenwoodtech.com/downloads.html
Q: Are real-mode drivers being used for the CD-ROM drive?
Real-mode drivers are not compatible with this software title; please install the latest plug and play drivers for your CD-ROM drive.
Q: Is your sound card a PCI64 using the ES1371 drivers, version 4.05.1127 or 4.05.1129?
Please install the latest drivers for your sound card.
Q: Are you running the game on a Dell 4100/4300 series computer and Windows 2000?
Intel identified a problem with the Intel Ultra ATA storage controller, and has offered an update on their web site.
1) The update to the Intel Application Accelerator program can be found here:
http://www.intel.com/support/chipsets/iaa/
2) The latest drivers for the Intel storage controllers can be found here:
http://appsr.intel.com/scripts-df/Product_Filter.asp?ProductID=182
Select the drivers for Windows 2000, download and run the setup program, then reboot.
OTHER KNOWN ISSUES
If you run the game under Windows 98/ME, there may be a delay between the visuals and corresponding sound effects. To correct this issue, reduce Screen Resolution and Rendering Resolution.My PC spec is:
System Manufacturer: INTEL_
System Model: D845GBV2
BIOS: BIOS Date: 07/14/03 11:28:48 Ver: 08.00.08
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz
Memory: 1022MB RAM
Page File: 461MB used, 1999MB available.
DirectX Version: DirectX 9.0c (4.09.0000.0904).
Display Devices:
Card name: ABIT Siluro FX5200
Manufacturer: ABIT
Chip type: GeForce FX 5200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0322&SUBSYS_8F15147B&REV_A1
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (85Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.6177 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 7/15/2004 11:42:00, 3740032 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 7/15/2004 11:42:00, 2459712 bytes
Device Identifier: {D7B71E3E-4062-11CF-EA6F-1FAF00C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0322
SubSys ID: 0x8F15147B
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
-------------
Sound Devices:
Description: SB Audigy 2 Audio [DC00]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0008&SUBSYS_10011102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.12.0001.0522 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 4/29/2004 05:01:00, 374000 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 192000
Static/Strm HW Mix Bufs: 64, 62
Static/Strm HW 3D Bufs: 64, 62
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
---------------------
Sound Capture Devices
---------------------
Description: SB Audigy 2 Audio [DC00]
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ctaud2k.sys
Driver Version: 5.12.0001.0522 (English)
Driver Attributes: Final Retail
Date and Size: 4/29/2004 05:01:00, 374000 bytes
Cap Flags: 0x41
Format Flags: 0xFFF-----------
DirectMusic
-----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: Enabled
Ports: SB Audigy 2 DirectMusic Synthesizer [DC00], Hardware (Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy 2 Audio [DC00], Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy 2 Synth A [DC00] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy 2 Sw Synth [DC00] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
SB Audigy 2 Synth B [DC00] [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal
Registry: OKwhat can i do?

Update your video drivers...
www.nvidia.com
Update your Audigy drivers...
http://www.creative.com/language.asp?sDestUrl=/support/downloads/su.asp
You may also need to update your motherboard's chipset drivers. Do you happen to know what chipset your motherboard has?
"If that [soiled bed] sheet is a [holy] manifestation, then I'm working on a miracle in my Jockey's!"

No, no, no. This is a known issue related to some old CODEC already installed in your computer interfering with the games' engine.
You must find and uninstall it manualy (99,9% chances are you don't need this codec anyway).
Good luck.
Peace.

hi!
I have sh3 for pc and I installed sucessfully and all. But when I try to play, appear an error message than say: "invalid cd game" or something like that. But all the 5 CDs game are fine, and i dont know how fix this problem. Help please. Note: excuse my english, I'm not good with the english.
thanks...

![]() |
Will My PC Run Battlefiel...
|
cs stats
|

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |