|
|
|
Microtek E3 and Win XP
|
Original Message
|
Name: Jo Was
Date: September 15, 2001 at 11:07:11 Pacific
Subject: Microtek E3 and Win XP
|
Comment: Is there a way to continue using my Scanmaker E3 with the new Win XP? Do I have to throw it away? Anyone can tell me where to find the driver for it, please
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Victor Diaz
Date: November 8, 2001 at 18:09:02 Pacific
|
Reply: (edit)Hi, I just got my E3 to work with XP!!! Download ScanWizard 2.60 from www.microtek.com and install it!!! Good Luck
 Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: Robert
Date: December 28, 2001 at 21:41:35 Pacific
|
Reply: (edit)I have a ImageStar I and they say its the same as the E3 i was wondering if anyone knew if this is true and if so how do you get XP to see the drivers
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: sergio vazquez
Date: January 16, 2002 at 09:44:32 Pacific
|
Reply: (edit)For use scanmaker E3 whit windows xp,
only must install scanwizard 2.60 for
windows 2000, its work excellent with
windows xp link for download scanwizard 2.60 ftp://ftp.microtek.com/microtek/pcfiles/
sw260.exe
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: Luc Maréchal
Date: January 17, 2002 at 00:56:03 Pacific
|
Reply: (edit)Hi ! I changed my computer to an Athlon XP1500+, and don't have any ISA bus anymore. So I bought an Adaptec 2904CD SCSI card to make my Scanmaker E3 work under windows XP. But I cannot recognise the scanner from XP.
Even after installind SW 2.60, as I try to detect new hardware, the scanner initialises, but no new hardware is detected. Do you know if that can come from the card or not. NB I don't use any terminator, but it used to work as it is under windows 2000 without any service pack
Thanks in advance for your answers.
Luc
Report Offensive Follow Up For Removal
|
|
Response Number 6
|
Name: TAC
Date: January 22, 2002 at 15:28:56 Pacific
|
Reply: (edit)I have the same problem, my E3 is not working under XP despite the fact that I have installed SW 2.60. Seems like my SCSI card is ok, but Photoshop can't find the scanner. Anyone knows about a good scsi prober for windows, with diagnostics? Or any other suggestion why I can't get my scanner to work? Thanks for any reply.
TAC
Report Offensive Follow Up For Removal
|
|
Response Number 7
|
Name: Jon
Date: January 27, 2002 at 18:49:15 Pacific
|
Reply: (edit)I can't get my E3 to work with XP!!!!!!
Help!!!!!!!!!!!!!!!!!! Is there some sort of scsi patch available for xp or something??
Report Offensive Follow Up For Removal
|
|
Response Number 8
|
Name: ken
Date: February 28, 2002 at 13:33:53 Pacific
|
Reply: (edit)In order to use your E3 with XP, you must have aspi drivers installed. Be warned that XP will give you a warning, but generally you can go ahead and install them anyway. ASPI drivers can be found all over the net. Just do a search. -Ken
Report Offensive Follow Up For Removal
|
|
Response Number 9
|
Name: Dennis
Date: March 18, 2002 at 19:59:44 Pacific
|
Reply: (edit)I have an E3 and Windows XP, which does not recognize the E3. I reloaded scanmaker 2.60 and got the apsi 4.7 layer from Adaptec and no matter what I do, the computer doesn't see the scanner. When I loaded XP, I had a Plextor CDR attached but when I went to switch to the scanner, no luck. This combination worked under Windows 98. I checked the cables as well as I could and even installed SW 2.60 under Safe Mode. I am really stuck here. Any help would be greatly appreciated! Dennis
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
|
|
|
