please send or locate driver for roland scc1 midi sound card win98.

ray, i've got the original drivers, please mail me if your'e still interested. instead you can try to install a standard MSoft-MPU401 driver with hardware-setup manually! by setting the irq and port-nr exactly as set on your soundcard. no other devices may be in conflict with those adresses. midi-in and -out should work (although you won't see them in the mm-preferences) and the card-sounds will also be availible. if you don't have a manual, read these lines from roland's: no keys----------- SCC-1 IRQ: With the connectors of the card facing down and to the right, the jumpers used to change IRQ’s are located near the bottom center. IRQ’s are labeled on the card IRQ 2/9, 3, 4, 5, 6, 7. Move the jumper to the appropriate position. Port Address: There are two jumpers labeled 1 and 2 on the SCC-1 used to change Port Address. With the connectors of the card facing down and to the right, these jumpers should be located near the top center of the SCC-1 on the right. You will find an OFF and ON position for each of the jumpers. Move the connector to the desired location using this chart: J1 J2 Port 330 off off Port 332 on off Port 334 off on Port 336 on on no keys---------------- good luck, mat@lo51.org

If you haven't found the SCC-1 driver yet e-mail me & I'd be happy to send you a copy of the one that came with my card. It is a great card. By the way, have you been able to figure out a way to use it on the new P-4's with no ISA slot?