Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |

Hello,,,, :) :)
Just put an Acer CRT Monitor Model 7133S on a Compaq/Presario.
The Compaq/Presario has the following;
Windows 98 SE
Adapter: Standard PCI Graphics Adapter
Driver for the Standard PCI Graphics
Adapter (vga.drv, vmm32.vxd, vdd.vxd)The driver loaded for the Monitor is the following:
AcerView 7133S
The selection of
Start/Settings/ControlPanel/DISPLAYShows that the DISPLAY SETTINGS is stuck on a choice of 2 colors or 16 colors.
Is there a way to get this to allow the selection of more colors (i.e. 256) ????
THANKS for your time, help, and advice!!! :) :)
Jerry

Visit Compaq's website, download & install the
correct drivers for the display adapter of your presario model.The Standard PCI Graphics Adapter is the generic Windows adapter.

Hello Keller,,,, :) :)
THANKS for the info-----at Compaq the driver
file for the board in this Presario is:It was downloaded and installed! It works like a champ and several selections for color, etc. are now working.
THANKS again for your time, help, and advise!!!! :) :) :)
Jerry

![]() |
Nokia M1122 dsl Modem
|
windows 2000 wont load dr...
|

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |