Hi!, anybody knows how I can make a boot disk in dos with networking drivers in a VMWare's Virtual Machine? Thanks?

Try this site www.nu2.nu/bootdisk choose to make a network bootdisk, for vmware you would need to use AMD Pcnet.cab in your modular bootdisk. hope this helps or just drop me an email if you like..

Hi, If u've VMware-workstation-3.1.1-1790's serial or patch plz send me. c:\ COMMAND COM NET MOUSE INI AUTOEXEC BAT KICKNIC COM MOUSE COM CONFIG SYS HIMEM SYS 7 file(s) 175 690 bytes 3 dir(s) 26 624 bytes free net\ MSCLIENT TXT PROTOCOL INI SYSTEM INI TCPUTILS INI CNMOD EXE EMSBFR EXE NET EXE NMTSR EXE PROTMAN EXE TCPTSR EXE TINYRFC EXE NETBIND COM UMB COM IFSHLP SYS NDISHLP SYS LMHOSTS WFWSYS CFG "Special net.exe, net.msg and neth.msg needed not included in dos Autoexec.bat: @ECHO OFF @PROMPT $P$G SET TZ=GMT0GDT-1,M3.5.0/01:00,M10.5.0/02:00 kicknic cd net cnmod net initialize /dynamic netbind tcptsr tinyrfc net start basic 'net use "drive": \\"PCname"\"Share" 'and net share "ShareName"="path" 'don't put (") just use your disk, path Config: DEVICE=HIMEM.SYS DEVICE=\NET\IFSHLP.SYS FILES=60 STACKS=0,0 BUFFERS=30 LASTDRIVE=Z protocol.ini: [NETWORK.SETUP] VERSION=0X3110 NETCARD=MS$CARD,1,MS$CARD,1 TRANSPORT=TCPIP,TCPIP LANA0=MS$CARD,1,TCPIP [MS$CARD] DRIVERNAME=EL90x$ [PROTMAN] DRIVERNAME=PROTMAN$ PRIORITY=MS$NDISHLP [TCPIP] NBSESSIONS=6 DEFAULTGATEWAY0= SUBNETMASK0= IPADDRESS0= DISABLEDHCP=0 DRIVERNAME=TCPIP$ BINDINGS=MS$CARD LANABASE=0 system.ini: [NETWORK] FILESHARING=YES PRINTSHARING=YES AUTOLOGON=YES COMPUTERNAME=DM5e2f240f LANROOT=\net\ USERNAME=LiK WORKGROUP=NGO LOGONDOMAIN= RECONNECT=NO DOSPOPHOTKEY=N LMLOGON=0 PREFERREDREDIR=FULL AUTOSTART=FULL MAXCONNECTIONS=8 [NETWORK DRIVERS] NETCARD=El90x.dos TRANSPORT=TCPDRV.DOS,NEMM.DOS DEVDIR=\net\ LOADRMDRIVERS=YES difference system.ini [NETWORK] . . . COMPUTERNAME="ComputerName" USERNAME="UserName" WORKGROUP="Workgroup" . . . [NETWORK DRIVERS] . . . NETCARD="filename".dos . . . [Password Lists] *Shares="disk":\"folder"\Shares.PWL PC3="disk":\"folder"\"username".PWL 3com RTL protocol.ini . . . [MS$CARD] DRIVERNAME=EL90x$ DRIVERNAME=RTSND$ . . . LanDriveDos