Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

Toshiba T1200

Comment:

can anyone help with instruction mauals for my T1200. I also need a start-up disk please.

Reply:

I don't have a manual, but I figured the whole thing out. It has a 720KB diskette, if you don't have one, take a normal 1.4MB disk, and cover over the hole on the left when looking at the front (the one without the sliddy tab) and make it a bootdisk. hold down FN+home to make on the LCD FN + PGup for max 9Mhz speed Fn + PGdn for min 4.77 speed Fn + end for CRT / composite out The switch on the side "a, b, dis" selects the drive the external drive port is, set it to "dis" if you don't have one. If yours is equiped with a harddrive, the vertically mounted switch must be on at boot for the computer to recognize it.

0

USB dos drivers

MS client 3.0 problem

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: I have a toshiba t1200 with an 8086 processor @ 9.54 MHz and 1 Mb (built-in) ram running dos 6.22 and windows 3.0 , 20 MB hard drive (Drivespaced) and a 720kb 3.5" floppy drive. Dos only uses the firs...

Summary: I have a TOSHIBA T1200 NOTEBOOK Here are the system specs: 20MB HD 1 720K floppy disk drive LCD display Anyways, the laptop is having a very difficult time recognizing the HD even if i switch the HD b...

Summary: Hey i a problem i have A toshiba T1200 with dos 3.30. i dont have the file to boot my system up and bring to the C:\ drive It always says bad or missing Command Interpreter.Can someone help and tell m...