Help does anyone know how to use VBEHz. I need it to display my DOS at 1024x768 85Hz. But the program doesn't offer any how to use instructions. So I'm quite stuck. All I'm told is to load 2 lines at my autoexec.bat: C:\Gx00VBE\Gx00VBE.COM (*a VBE3 driver for the G400 card) C:\VBEHZ\VBEHZ.COM And when I reboot this is what I see at DOS screen: --------------- G400VBE V0.8 has been installed, frambuffer at 0E8000000h VBEHertz 2.23 (Freeware) now installed and active Supported modes: _____________________________________________________________ 5 res. 640 x 400, 130 Hz | 0 text 80 x 60, 100 Hz 5 res. 640 x 480, 130 HZ | 1 text 132 x 25, 70 Hz 5 res. 800 x 600, 125 Hz | 1 text 132 x 43, 70 Hz 5 res. 1024 x 768, 85 Hz | 1 text 132 x 50, 70 Hz 5 res. 1152 x 864, 90 Hz | 1 text 132 x 60, 70 Hz 5 res. 1280 x 1024, 75 Hz | 0 res. 1600 x 1200, 65 Hz 5 res. 512 x 384, 95 Hz 5 res. 400 x 300, 125 Hz 5 res. 320 x 240, 130 Hz 5 res. 320 x 200, 130 Hz Copyright Gerhard Stranger 1998-2003 gerhard@xxxx.net, g.s@xxxx.de Fido: 2:2480/8057.2 http://home.nexgo.de/g-s Using 736 Bytes of Memory (including MCB) C:\> ------------ I still see the same flicker and large text. So how to proceed then to make it 1024x768 85Hz? Using a Matrox G400 card. Thanks.

What I understand from this site: Link, it doesn't work in DOS, only in a Windows 95-98 DOS-box. Also to my knowledge you can't change the resolution on real DOS since it is textbased. Nigel