Hi, I need PCMCIA drivers for dos for my Compaq EVO600. On oficial site there are any. It use Texas Instruments PCI to PCMCIA bridge TI PCI-1420. I'd like to use my CF-PCMCIA reader to enable CF card as another drive. I found and tried two driver packages: CardSoft 5.32.23 - it displays something about incompatible platform and didn't install. PhoenixCARD Manager 3.01 - it install and detect i82365 (it could be compatible with PCI-1420) and even associate drive letters for slot 0,1 but I cannot read from this drives :( Any other sw I can try?

Cardware 7.0 is the only current C&SS Software: http://www.tssc.de/

Hi, thanks for the link. I installed cardware 7 and let it modify my startup files. When booting, loading folowing files in config.sys: DPMS - OK PCCS - "Socket Services not loaded" but below it prints "Card Services installed successfully" SSPCIC /AP:ON /VS:AUTO /EC:AUTO /II:OFF /MX:OFF - "Detected: Texas Instruments PCI1420 (CardBus with 2 sockets(s) at I/O base 3E0h", "Number of PC Card adapters found: 1", "Socket Services installed successfully" PCENABLE - "ERROR: Unable to register as Card Service Client, Return Code 20h, PCENABLE installation aborted" PCATA - hangs my PC and I have to reboot. Any idea why PCENABLE fails? I guess it detect the PCMCIA bridge OK but failed later.

And when I have FC adapter inserted, DOSCARD.exe /a reports that card is present: Scocket: '0' Card: unable to get the card name Voltages: Vcc: 3.3V Vpp1: 3.3V Vpp2: 3.3V Function: Unknown function Device: none Configured by: card was not configured Socket: '1' Card: No Card inserted Hm, seems like the drivers know my PCMCIA bridge but doesn't know the CF card