Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
NON-System disk or disk error!!
Name: Help! Date: November 7, 2000 at 10:00:41 Pacific
Comment:
Everytime I boot up my computer it says Non system disk or disk error...but the thing is, there is no disk in the a: drive..i even went into the bios and disable a: drive...and it still gives me that error...any suggestions?
Name: MF Date: November 7, 2000 at 11:10:20 Pacific
Reply:
Your computer cannot find a operating system to boot from so it is saying that message. Is this computer new or did it work before. Look in your BIOS and make sure your computer detect your hard drive. If your computer work before, you need to insert a bootable diskette in your computer. Make sure your BIOS states to boot off the A: drive. Once it boots off the floppy change to the C: drive and make sure all your data and everything else is there. If it is then you need to issue a SYS C: but only from a bootable disk that has the same version and operating system as your hard drive, you have to make sure the SYS command is on your floppy.
0
Response Number 2
Name: Help! Date: November 7, 2000 at 11:18:48 Pacific
Reply:
Thanx MF...it worked!
0
Response Number 3
Name: Miklos Date: November 28, 2000 at 02:10:51 Pacific
Reply:
I have a same problems! but i can't enter in BIOS??? My computer is COMPAQ LTE laptop with HDD 286 How I can setup the BIOS??? Thank you!
0
Response Number 4
Name: nancy borden Date: February 19, 2001 at 19:05:08 Pacific
Reply:
we bought this computer from someone else and my neice deleted alot of things and we can't get it to anything.you can't type anything and we don't have a bootup disk for it .can you help me THANK YOU NANCY
Summary: having got my floppy drive working--- a new cable---- am trying to boot up with dos 6.22 it comes up with non system disc or disc error----i dont know what other disc to use any ideas anybody...
Summary: I have an 80286 system i'm goofing off with. I was reading a floppy in the A drive(of course). The power went out and when I restarted it. It was still in the A drive with the error message, ...
Summary: i recently installed an hsb(apache) m/b, with a cyrix 686(266mhz) chip, i have 48mb of memory and two rather old hard drives(135mb, primary master:426mb, secondary master). im booting off the older on...