I have problem to detect my SmartLink internal Modem for using it under DOS with Arachne. It works well in my W98, so if I need any info or driver I have, but in pure dos it doesn't work (no detection, no dial) Arachne is not able to automatically detect. Do I have to install any driver in my config.sys or just put settings in arachne like port=COM3 and IRQ (Which? 4?) Any idea? Here is my log under W98, may be useful to help me 02-12-2004 07:22:40.21 - Smart Link 56K Voice Modem in use. 02-12-2004 07:22:40.21 - Modem type: Smart Link 56K Voice Modem 02-12-2004 07:22:40.21 - Modem inf path: OEM1.INF 02-12-2004 07:22:40.21 - Modem inf section: MODEM1 02-12-2004 07:22:41.69 - 921600,N,8,1 02-12-2004 07:22:41.83 - 921600,N,8,1 02-12-2004 07:22:41.83 - 921600,N,8,1 02-12-2004 07:22:41.83 - WARNING: Unable to load the 'Modulation_Bell' string. 02-12-2004 07:22:41.83 - Initializing modem. 02-12-2004 07:22:41.83 - Send: AT<cr> 02-12-2004 07:22:41.83 - Recv: AT<cr> 02-12-2004 07:22:41.83 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:41.83 - Interpreted response: Ok 02-12-2004 07:22:41.83 - Send: AT &F E1 V1 &A3 &D2 &C1 S0=0<cr> 02-12-2004 07:22:41.83 - Recv: AT &F E1 V1 &A3 &D2 &C1 S0=0<cr> 02-12-2004 07:22:41.83 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:41.83 - Interpreted response: Ok 02-12-2004 07:22:41.83 - Send: ATS7=60S19=0L3M1\N3%C3&H1X4<cr> 02-12-2004 07:22:41.83 - Recv: ATS7=60S19=0L3M1\N3%C3&H1X4<cr> 02-12-2004 07:22:41.83 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:41.83 - Interpreted response: Ok 02-12-2004 07:22:41.83 - Send: ATs11=50 <cr> 02-12-2004 07:22:41.83 - Recv: ATs11=50 <cr> 02-12-2004 07:22:41.83 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:41.83 - Interpreted response: Ok 02-12-2004 07:22:41.83 - Dialing. 02-12-2004 07:22:41.83 - Send: ATDP;<cr> 02-12-2004 07:22:41.84 - Recv: ATDP;<cr> 02-12-2004 07:22:45.13 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:45.13 - Interpreted response: Ok 02-12-2004 07:22:45.13 - Dialing. 02-12-2004 07:22:45.13 - Send: ATDP##############<cr> 02-12-2004 07:22:45.14 - Recv: ATDP80025240000<cr> 02-12-2004 07:22:53.19 - Hanging up the modem. 02-12-2004 07:22:53.19 - Send: <cr> 02-12-2004 07:22:53.22 - Recv: <cr><lf>NO CARRIER<cr><lf> 02-12-2004 07:22:53.22 - Interpreted response: No Carrier 02-12-2004 07:22:53.22 - Send: ATH<cr> 02-12-2004 07:22:53.22 - Recv: ATH<cr> 02-12-2004 07:22:53.23 - Recv: <cr><lf>OK<cr><lf> 02-12-2004 07:22:53.23 - Interpreted response: Ok 02-12-2004 07:22:53.23 - 921600,N,8,1 02-12-2004 07:22:54.23 - Session Statistics: 02-12-2004 07:22:54.23 - Reads : 149 bytes 02-12-2004 07:22:54.23 - Writes: 100 bytes 02-12-2004 07:22:54.23 - Smart Link 56K Voice Modem closed.

All SmartLink internal Modem are soft modems or WinModems or controllerless modems. Duh.. DOS requires an actual hardware modem with a controller on it. The "Windows" drivers and support are far larger than can fit in DOS memory, even if they would work. You will need to buy a real modem to use with DOS. About the only ones you can find now days new are external modems.