Computing.Net > Forums > Disk Operating System > Missing operating system for Compaq Deskpro 486!!!!!!!!!!!!!!

Missing operating system for Compaq Deskpro 486!!!!!!!!!!!!!!

Reply to Message Icon

Original Message
Name: LAJ
Date: January 20, 2001 at 13:17:18 Pacific
Subject: Missing operating system for Compaq Deskpro 486!!!!!!!!!!!!!!
Comment:

The only thing that appears on the screen once the pc is turned on is MISSING OPERATING SYSTEM...it does not let me go anywhere from there. Is there a way to get into the system???


Report Offensive Message For Removal


Response Number 1
Name: Casey
Date: January 20, 2001 at 16:52:19 Pacific
Reply: (edit)

Was it working fine prior to this?


Report Offensive Follow Up For Removal

Response Number 2
Name: DAVEINCAPS
Date: January 20, 2001 at 22:01:02 Pacific
Reply: (edit)

Make sure HD is identified properly in cmos. If so boot from a system disk and type sys c: at the a: prompt.


Report Offensive Follow Up For Removal

Response Number 3
Name: LAJ
Date: January 21, 2001 at 22:37:51 Pacific
Reply: (edit)

Well, it was just given to me...so I don't know. I turned it on and the only thing that appeared was the missing operating system message. Not even an a: or C: prompt is given. Whatever I do it still turns up with the same message.


Report Offensive Follow Up For Removal

Response Number 4
Name: DAVEINCAPS
Date: January 22, 2001 at 17:42:22 Pacific
Reply: (edit)

They probably wiped the HD before you got it. You need to get a dos boot disk. If you don't have one or can't borrow one I'm told you can find them at www.bootdisk.com. If it boots up ok then all is probably well and you need to find a dos full version, preferrably 6.22 and install it on your computer.


Report Offensive Follow Up For Removal

Response Number 5
Name: fred6008
Date: January 24, 2001 at 21:13:14 Pacific
Reply: (edit)

Sometimes a bad hard drive controller on a SCSI system will do that. It says missing operating system and won't boot past the controller bios even with a boot floppy.
I know nobody said anything about SCSI, but if it is SCSI take the controller out of the isa or pci slot and see if the floppy will boot.


Report Offensive Follow Up For Removal


Response Number 6
Name: FATboy
Date: January 26, 2001 at 10:55:50 Pacific
Reply: (edit)

Hi. If you boot from a dos 6 disk (preferably setup #1) and hit F5 when "Starting MS-DOS" appears, you should be able to SYS the hard disk from there. Note that if the disk you SYSed from's version is different from the preinstalled OS on the hard disk, you may have to reinstall DOS completely, but SYS it to at least get it to boot.


Report Offensive Follow Up For Removal

Response Number 7
Name: Nicholas
Date: March 27, 2001 at 07:06:39 Pacific
Reply: (edit)

my Compaq deskpro 2000 doesn't have bios(CMOS). How do you load it in the system. And where can you get that BIOS


Report Offensive Follow Up For Removal






Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: Missing operating system for Compaq Deskpro 486!!!!!!!!!!!!!!

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software




Have you ever used OpenOffice?

Yes, as my main suite.
Yes, occationally.
Yes, but only once.
No, never.


View Results

Poll Finishes In 5 Days.
Discuss in The Lounge