Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

DOS-USB utility DUSE.EXE

Comment:

Hi - I ran DUSE on my Compaq running DOS 7.22 but it wouldn't recognize my jump drive on the any of the USB ports. Config.sys: DEVICE=C:\DUSE\DUSE.exe VERBOSE DRIVES=2 XFER=8 SEC=2048 What am I missing? Thanks! electron@insight.rr.com

Name: dosser
Date: October 20, 2006 at 13:53:18 Pacific

Reply:

Try using the Panasonic DOS USB Driver, link at bottom of this page: http://www.mwpms.uklinux.net/usbfir... " device=usbaspi.sys /v " Please be aware that these drivers were developed for 'Standalone MS-DOS 6.22 and Compatable'

0

Reply:

go to http:\\fracassi.net\iw2evk\ and download dosusb.zip files with a collection of usb dos drivers roberto milan

0

Reply:

Thanks I'll try that - the other suggestion didn't work electron@insight.rr.com

0

dr-dos and multitasking

Networking with DEC 21140

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: I wondered if you could help. I am trying to enable a USB Safecom Technologies 5.25 Disk Caddy in DOS (Maxtor 20GB Hard Drive). The hard drive has been formatted with 8GB FAT32 Partition. I have used ...

Summary: I've been able to see the drive (and CF & Smart Media) in DOS using DUSE (device=duse.exe wait=1 nocdrom sec=512 int13 ver=1 uhcn=1). I changed from a USB 2.0 reader (SanDisk 6-in-1) to a 1.1 reader ...

Summary: So far the following DOS boot disk has worked on every system I have tried it on (3 homebrew desktops, a Dell desktop, and a Sony notebook). I found this site 2 weeks ago while trying to get DOS to re...