Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

DOS Printing Problem...

Comment:

Hi, Can someone help me on this one, I had an Epson LQ-570+ its been functioning under my DOS 6.22, but when I format the CPU it suddenly stops printing, I can issue the >prn & >LPTn but it doesnt print any, there's no error messages, so I guess its printing internally but no output at all....Thanks in advance...

Name: Mechanix2Go
Date: April 21, 2005 at 00:15:21 Pacific

Reply:

Check BIOS to see if the port os enabled and on the default address and IRQ. M2 If at first you don't succeed, you're about average.

0

Name: Mike Newcomb
Date: April 21, 2005 at 08:41:00 Pacific

Reply:

Was it connected using one of the serial ports? If yes, you need a couple of MODE statements in AUTOEXEC.BAT. Good luck - Keep us posted.

0

DOS copying files / drive...

COM1 setup

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: I have a printer all-in-one (Canon MPC 400) and I have not a DOS driver for that (I use FoxPro 2.6 for DOS). Is there software that will print FOXBASE under DOS to my INK JET printer ? I have to print...

Summary: Ok - here's the situation. We have a user who still uses Lotus for DOS. She has a local printer set up on LPT1 (Canon BJC-1000). She wants to print from Lotus to that printer. She also prints to a net...

Summary: I just purchased a HP photosmart 7350 printer which is connected to a usb port. My PFS First choice program cannot find a printer on a usb port when I attempt to print from the program. I was wonderin...