Hi. I have a problem. Ive justed changed my pc from an AMD64+3500 with intergrated graphics. To a p4 3ghz with an ATI 128mb 9200 card. This was ok on XP but as soon as i updated to vista it was unsupoported and kept causing BSOD. However it still recognised my lcd tv as a sharp digital monitor. I took the ati card and replaced it with a new Nvidia FX5500pci card. Brilliant it works with vista. However it keeps saying that my monitor is a Non pnp monitor. I can get a screen of 1080 via selecting it as a secondary monitor and not the primary as this defaults it back to 680!!!!. Ive lost all the settings i could alter. I ran a prog called moninfo. I have it connected to the lcd VGA to VGA. The ati translated theVGA to XGA signal at the tv end but the nvidia card just pushes it through as a VGA signal? Any Advice?? it wont even aloow to me to change it from an analogue to a digital tv via the control panel?? Monitor Model name............... LCD1990SXi Windows description...... Generic PnP Monitor Manufacturer............. NEC Plug and Play ID......... NEC66AB Serial number............ 69006990YB Manufacture date......... 2006, ISO week 37 ------------------------- EDID revision............ 1.3 Input signal type........ Analog 0.700,0.300 (1.0V p-p) Sync input support....... Separate, Composite, Sync-on-green (w. pulse) Display type............. RGB color Screen size.............. 380 x 300 mm (19.1 in) Power management......... Standby, Suspend, Active off/sleep Extension blocs.......... None ------------------------- DDC/CI................... n/a Color characteristics Default color space...... Non-sRGB Display gamma............ 2.20 Red chromaticity......... Rx 0.640 - Ry 0.344 Green chromaticity....... Gx 0.290 - Gy 0.608 Blue chromaticity........ Bx 0.145 - By 0.074 White point (default).... Wx 0.313 - Wy 0.329 Additional descriptors... None Timing characteristics Horizontal scan range.... 31-82kHz Vertical scan range...... 48-85Hz Video bandwidth.......... 140MHz CVT standard............. Not supported GTF standard............. Not supported Additional descriptors... None Preferred timing......... Yes Native/preferred timing.. 1280x1024p at 60Hz (5:4) Modeline............... "1280x1024" 108.000 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync Standard timings supported 720 x 400p at 70Hz - IBM VGA 640 x 480p at 60Hz - IBM VGA 640 x 480p at 67Hz - Apple Mac II 640 x 480p at 72Hz - VESA 640 x 480p at 75Hz - VESA 800 x 600p at 56Hz - VESA 800 x 600p at 60Hz - VESA 800 x 600p at 72Hz - VESA 800 x 600p at 75Hz - VESA 832 x 624p at 75Hz - Apple Mac II 1024 x 768p at 60Hz - VESA 1024 x 768p at 70Hz - VESA 1024 x 768p at 75Hz - VESA 1280 x 1024p at 75Hz - VESA 1152 x 870p at 75Hz - Apple Mac II 640 x 480p at 85Hz - VESA STD 800 x 600p at 85Hz - VESA STD 1024 x 768p at 85Hz - VESA STD 1152 x 864p at 75Hz - VESA STD 1280 x 960p at 60Hz - VESA STD 1280 x 1024p at 60Hz - VESA STD Report information Date generated........... 4/24/2009 Software revision........ 2.30.0.797 Operating system......... 6.0.6000.2 Raw data 00,FF,FF,FF,FF,FF,FF,00,38,A3,AB,66,01,01,01,01,25,10,01,03,0F,26,1E,78,EA,C7,05,A3,58,4A,9B,25, 13,50,54,BF,EF,80,31,59,45,59,61,59,71,4F,81,40,81,80,01,01,01,01,30,2A,00,98,51,00,2A,40,30,70, 13,00,78,2D,11,00,00,1E,00,00,00,FD,00,30,55,1F,52,0E,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4C, 43,44,31,39,39,30,53,58,69,0A,20,20,00,00,00,FF,00,36,39,30,30,36,39,39,30,59,42,0A,20,20,00,80