System gets stop after some time

March 4, 2011 at 08:56:00
Specs: Windows XP, pentium-3
My cpu processor fan was making noise. So, i removed it and cleaned it..after reinstalling the fan properly..the system responding stops after some i need to restart my system again n again...Can any one please help me to sortout he problem..


See More: System gets stop after some time

Report •

March 4, 2011 at 09:03:57
it started happening once u removed ur cpu fan and then reinserted it, then u reinstalled it wrong. the heatsink could not be installed properly the thermal paste compound may have been removed, the screws on the fan and the cpu were not applied properly the cpu may not be stable due to the noise its getting overheated if ur at idle that is.
u need to install the cpu properly
my advice if u cant do it alone then take it to a speacialist to do it for u

computers are a second home

Report •

March 4, 2011 at 19:27:00
If you removed the heat sink from the processor, then the thermal compound needs to be removed completely (rubbing alcohol) and new thermal compound needs to be applied correctly. Do not use metal to help remove the compound (small scratches will reduce heat transfer), use an old credit card or similar plastic if needed. On your processor you need to put a small amount in the center about the size of a grain of rice, It will spread itself out and this way there will not be trapped air bubbles that will interfere with the thermal transfer.

You have to be a little bit crazy to keep you from going insane.

Report •

Related Solutions

Ask Question