Computing.Net > Forums > CPUs/Overclocking > RAM Detection Problem in Windows

Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.

RAM Detection Problem in Windows

Reply to Message Icon

Name: Bert770
Date: March 18, 2002 at 16:07:41 Pacific
Comment:

I have a ECS K7S5A with 256 mo of RAM PC133 and sometime, when I boot my computer, at the memory countdown, they indicate that I have 256 mo but when I arrive in Wndows XP, in the "System" section in "Control Panel" they say that I have only 128 mo of RAM. But when I reboot my Windows now detects my 256 mo of RAM. When Windows detects 128 mo, my system is more slow that when he detects 256 mo. Also, I found that the problem occurs when my computer has been turned off. For example, I boot my computer, Windows indicates 128, I shut down my computer and I reboot it and Windows now indicates 256 and when shut down and reboot Windows indicates 128 again. But, each time the memory countdown at the boot of my computer shows 256 mo. My bios is configured to "Quck memory countdown", maybe it can help you. I don't think that is my memory who is broken because at the boot on the computer, 256 mo is always indicated in the countdown.
Does anybody have a solution? Thanks to anybody who will help me!




Sponsored Link
Ads by Google

Response Number 1
Name: Troncc
Date: March 19, 2002 at 16:26:54 Pacific
Reply:

I have the same mb. The problem is not with your bios or your mb. But rather with the Windows XP OS.

The only thing I can suggest is searching other help topics on Win XP problems.

----------------
On another note:

Also, depending on the quality of ram you have installed. If you didn't already, try setting the ram settings to "3T". You will see the speed difference.
----------------
P.S. - The quick memory setting, ("Quck memory countdown"), is only for performing a RAM selftest at boot. It is not really neccesary except in the case of failing ram, where it is nice to know you need new ram. I always have mine disabled, it saves a few seconds of boot time.
----------------
P.P.S. - Also, not to overdo the P.P.'s lol. Most poeple who own this mb do not realize the default settings in bios are set for 200Mhz. The mb allows you to run at 200Mhz FSB, or 266Mhz FSB, with the same cpu/133 ram chips. So in the CPU/RAM page of your bios, also make sure both the CPU and RAM are operating at 133Mhz
----------------

I hope this helps.

> Troncc


0
Reply to Message Icon

Related Posts

See More







Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.


Go to CPUs/Overclocking Forum Home


Sponsored links

Ads by Google


Results for: RAM Detection Problem in Windows

RAM upgrade problem www.computing.net/answers/cpus/ram-upgrade-problem/12479.html

Hav a problem in repair mode...vist www.computing.net/answers/cpus/hav-a-problem-in-repair-modevist/15247.html

HT enabled but not detected www.computing.net/answers/cpus/ht-enabled-but-not-detected/10847.html