Computing.Net > Forums > CPUs/Overclocking > PC freezes after new V.C. install

PC freezes after new V.C. install

Reply to Message Icon

Original Message
Name: Autotom
Date: September 1, 2005 at 21:33:19 Pacific
Subject: PC freezes after new V.C. install
OS: Windows XP
CPU/Ram: Athlon Sempron 2400+/1GB
Comment:

Greetings everyone,

I recently purchased a Jaton Nvidia Geforce 3dforce 6600-256 video card to replace the Geforce MX 4400-64 that was previously installed. Now my PC is consistently freezing up, requiring a re-boot. I cannot alt-tab or ctrl-alt-del.

Initially I installed the card without connecting the supplemental power. I was prompted that I hadn't done so and that the card would set itself to allow for this. I left it configured like this for a few days and had no problems.

When I finally connected the supplemental power, from the PSU bundle with 4 pin connector, the freeze ups started occuring. The cursor won't move and no keyboard commands work. Occasionally, two or three times out of maybe 20, the computer will re-boot itself.

This happens mostly on the internet, once in windows, and never while I'm playing a game. (I've only played 3-4 games with the supplemental power connected, however)

I've done the power supply calculator and it said I only needed 250-285W of power.

I'm hoping my processor isn't too weak to run it like that. I've only now come to realize that the Sempron is AMD's "budget" processor and not in-line with the P4s or Athlons. I'll list my system specs below and anxiously await what I'm sure will be some great advice. Let me know if you need more info.

AMD Sempron 2400+ 1.67GHz(video card said I required a Pentium 4 or comparable, but I couldn't find a cross reference anywhere I looked)
SOYO SY-KT6000 Dragon plus 2.0 MoBo
(2) Kingston 512MB DDR 400 PC3200 chips 1MB total(KVR400X64C3A/512)
Nvidia Geforce 3dforce 6600-256(AGP 8X)
Maxtor 80 GB 7200 RPM HD
Generic CDRW
Rexpower PX-400 PSU
1 80mm cooling fan
Windows XP


Report Offensive Message For Removal

Response Number 1
Name: jam
Date: September 2, 2005 at 05:01:56 Pacific
Subject: PC freezes after new V.C. install
Reply: (edit)

Those wattage calculators are just that...wattage calculators. They don't take amperage into account. My guess is you have a crappy generic PSU with too little amperage on the +12v rail & connecting the video card pushed it beyond it's limit. You may get by with 16A...18A is the general recommendation, more is even better.

ASUS A7N8X-X
Athlon XP 1800+
8.5 x 200MHz
1024MB PC3200 2.5-3-3-7
Asus A9550GE/TD 128MB
WinME/WinXP Pro SP1


Report Offensive Follow Up For Removal







Use following form to reply to current message:

   Name: From My Computing.Net Settings
 E-Mail: From My Computing.Net Settings

Subject: PC freezes after new V.C. install

Comments:

 


  Homepage URL (*): 
Homepage Title (*): 
         Image URL: 
 
Data Recovery Software