|
|
|
Overclocking my CPU ;d
|
Original Message
|
Name: xTariq
Date: September 16, 2004 at 12:51:34 Pacific
Subject: Overclocking my CPU ;dOS: Windows XPCPU/Ram: - |
Comment: Hey, I just have a few questions. I'm building a computer, and I wanted to overclock the CPU chip. Here are a few details of it. - CPU: Pentium 4 3.2EGhz 800M 478P/1MB HT Motherboard: Mach Speed X-Caliber (Supports up to 3.2Ghz) RAM: 1GB Fans: 4 Fans Total - If u need more information, please let me know. Also, letme add that, I have no experence with overclocking, so excuse me if I seem newbish ;d!... P.S.- I want to overclock it to a 3.6Ghz ;)! Thanks, Tariq "Let death knock! He doesn't know who he's messing with!"
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Pariah
Date: September 16, 2004 at 14:55:00 Pacific
Subject: Overclocking my CPU ;d |
Reply: (edit)if your mobo only supports upto 3.2gig, I dont know if it will take any overclocking cos your cpu already max's out the board.I may be wrong though. ASROCK K7S8X M/B AMD ATHLON 2000+XP@2ghz 384MB DDR 266MHZ GEFORCE4 AGP8X 64MB MAXTOR 60GB H/D LITEON SOHW-1213S DVDRW SAMSUNG SM-332B CDRW/DVD QTEC AND STATICX SILENT COOLERS
Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: jam
Date: September 16, 2004 at 19:00:42 Pacific
Subject: Overclocking my CPU ;d |
Reply: (edit)All you need to do is go into the BIOS, raise your FSB, save your setting, reboot, & test for stability. Do it in small increments...5mhz at a time. Your multiplier is locked at 16x & can't be changed, so to hit to 3.6ghz mark, you're gonna have to get the FSB up to 225mhz. You're RAM could be a limiting factor...you really should have PC3500 or better. PC3200 may not be able to handle running at that speed, unless you run async rather than n'sync. CPU & RAM voltage may have to be increased too, but see how high you can go with default voltages first. Asus A7N8X-X 1800+ @8x210mhz 512mb PC3200 Ti4200/8X 128mb WDC 60GB
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: xTariq
Date: September 18, 2004 at 15:34:15 Pacific
Subject: Overclocking my CPU ;d |
Reply: (edit)Async?... Can u explain? "Let death knock! He doesn't know who he's messing with!"
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: Tbird4point6LX97
Date: September 20, 2004 at 20:51:20 Pacific
Subject: Overclocking my CPU ;d |
Reply: (edit)async is running fsb and memory at different speeds your stock fsb is 200 mhz ( quad pumped to 800 ) pc3200 memory runs at 200 mhz ( 400 mhz DDR ) in my experimenting, since i only have pc3200 memory,here's one example, i set the bios to a 5:4 ratio and the resulting speeds were fsb=225 memory=180...running it that way is not the way to go, even though it was prime stable and got some good benchmarks, except for the memory where i took a huge hit. Abit AS8 LGA775 2.8 Prescott 512 Corsair XMS PC3200 128 meg Radeon 9800 Pro DUAL 36 GIG WD Raptors DUAL 21 in. ( 19.8 viewable ) Sony Trinitrons 3+ Mbps cable connection
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: Dark_I2e_VOLT
Date: October 11, 2004 at 12:18:04 Pacific
Subject: Overclocking my CPU ;d |
Reply: (edit)i am also wondering how to overclock my second computer, im new to the overclocking the CPU. i am runnin a pathedic 650MhZ AMD Duron proccesor. i want to get it to 2.2Ghz. im runnin very bad 192 Mb of bad RAM. im trying to get this one overlocked before i do it to my other beast of a robot =]
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
|
|

|