WELL, THANKS TO ALL OF YOUR HELP.. I PUT MY OVERCLOCKING SUCCESS STORY HERE. MY COMPUTER SPEC, CPU-P4 3.2G HT 800MHZ MOTHERBOARD--DFI LANPARTY PRO 875 REV. A RAM--2GB (4X512MB) OCZ DDR DUALCHANNEL I COULD START WINDOW XP NO PROBLEM AT 3.75G. IF I GO TO EVEN AT 3.76g COMPUTER WILL FREEZE, HAD TO SET CMOS AGAIN... AT 3.75G WINDOW BOOTS OK AND FIRST IT SEEMS JUST FINE UNTIL I TRY SOME BASIC FUNCTIONS, LIKE DISK CLEANNER, IT FREEZE WINDOW AND LOCK UP... SO I TRIED ABOUT 6HRS PLAYING WITH IT.. SET IT UP AT 3.67G AND STAYED VERY STABLE.. MAYBE, ONE OF YOUR GENIUS CAN DO WAY BETTER, SINCE I'M A BABY OVERCLOCKER.. HERE IS HOW I GOT THERE... 1) SET CAS SETTING AT 3.6.3.3 2) CHANGE DRAM FREQUENCY TO 320 MHZ INSTEAD OF 400MHZ(SINCE MY OCZ PC3200 RAM IS 400MHZ) IF I SET ANY HIGH COMPUTER LOCKS UP.. 3) SET MY CPU FREQUENCY TO 224MHZ X 16 MULTIPLIER.. 4) SET ALL CPU,DIMM,AGP VORETAGE AT DEFAULT. IF I SET HIGHER SOME HOW CPU TEMP. GET'S TO0 HIGH ... SO I DIDN'T. IT MAY NOT BE THE BEST OVERCLOCK,BUT I DECIDED TO STICK TO THIS ... I RAN SANDRA 2004 AND MARK 2002 ... SPEED TEST .. IT'S AT HOME SO I WILL WRITE RATIO LATER... INFACT, I NEED SOME HELP ON THAT TOO. I DON'T KNOW THOSE NUMBERS FAST OR SLOW.. MAY BE YOU CAN TELL ME.. THANKS EVERY ONE.. PAUL

Good for you. That's pretty much max out for the 3.2ghz too much pain to get a few more mhz. I got lucky to be able to run memory 1:1 ratio over 530 mhz. But, it won't pass Prime95, I settle for 524 same as FSB.

Thanks real_cool....!!!

Can i overclock an intel on a ECS motherboard?